MAVS uart opened Configuration file settings: ---------------------------- Number of parameters to read: 8 First cycle set for: Wed Jul 27 23:00:00 2005 Clamp test delay set for: 1 minutes Cycle interval set for: 60 minutes Ascending timeout set for: 800 seconds Ascending trigger depth set for: 15.0 meters Descending timeout set for: 60 seconds Descending trigger depth set for: 30.0 meters Time to wait at surface set for: 0 seconds Stored calibration settings: ---------------------------- Motor current coefficient: 0.000804 Aux 1 current coefficient: 0.000242 Aux 2 current coefficient: 0.000243 Aux 3 current coefficient: 0.000243 Aux 4 current coefficient: 0.000242 Switched battery voltage coefficient: 0.004309 Switched aux voltage coefficient: 0.004302 Depth coefficient: 0.051454 Motor current offset: 0 Aux 1 current offset: 0 Aux 2 current offset: 0 Aux 3 current offset: 0 Aux 4 current offset: 0 Switched battery voltage offset: 0 Switched aux voltage offset: 0 Depth offset: 231 SeaHorse II Ver. 1.31b Next cycle will start 5 seconds from now... Press the '&' key to bypass sampling and enter the main menu... Waiting... Attention...NextCycleTime occurs before current time. The system will update NextCycleTime to the next scheduled cycle Present time........... Wed Aug 31 08:37:57 2005 Next profile at........ Wed Aug 31 09:00:00 2005 ----------------------- Sleeping till.......... Wed Aug 31 08:59:00 2005 ----------------------- MAVS uart opened Configuration file settings: ---------------------------- Number of parameters to read: 8 First cycle set for: Wed Jul 27 23:00:00 2005 Clamp test delay set for: 1 minutes Cycle interval set for: 60 minutes Ascending timeout set for: 800 seconds Ascending trigger depth set for: 15.0 meters Descending timeout set for: 60 seconds Descending trigger depth set for: 30.0 meters Time to wait at surface set for: 0 seconds Stored calibration settings: ---------------------------- Motor current coefficient: 0.000804 Aux 1 current coefficient: 0.000242 Aux 2 current coefficient: 0.000243 Aux 3 current coefficient: 0.000243 Aux 4 current coefficient: 0.000242 Switched battery voltage coefficient: 0.004309 Switched aux voltage coefficient: 0.004302 Depth coefficient: 0.051454 Motor current offset: 0 Aux 1 current offset: 0 Aux 2 current offset: 0 Aux 3 current offset: 0 Aux 4 current offset: 0 Switched battery voltage offset: 0 Switched aux voltage offset: 0 Depth offset: 231 SeaHorse II Ver. 1.31b Next cycle will start 5 seconds from now... Press the '&' key to bypass sampling and enter the main menu... Waiting... SeaHorse II Ver. 1.31b Main Menu June 17, 2005 Configured CTD: Seabird SBE 19 Plus (9600_N_8_1) ---------------------------------------------- Format flash card [A] Display directory [B] Create configuration file [G] Create user header [H] Deploy SeaHorse [D] Display system data [E] Select free mode [F] Select climb mode [C] Instrument direct mode [M] Configure new CTD [N] Update system calibration [U] View system calibration [V] Test UIM [I] Seahorse calibration [S] Quit [Q] Enter selection........... [ ] ? e Displaying system data Type 'q' to quit...any other key to continue Motor curnt(a/d): 0 Current: 0.000(a) Aux 1 curnt(a/d): 10 Current: 0.002(a) Aux 2 curnt(a/d): 13 Current: 0.003(a) Aux 3 curnt(a/d): 71 Current: 0.017(a) Aux 4 curnt(a/d): 10 Current: 0.002(a) Battery(a/d): 2972 Battery: 12.806(v) Aux(a/d): 3008 Aux: 12.940(v) Depth(a/d): 235 Depth: 0.206(m) Selector Status: 1 Motor curnt(a/d): 0 Current: 0.000(a) Aux 1 curnt(a/d): 10 Current: 0.002(a) Aux 2 curnt(a/d): 13 Current: 0.003(a) Aux 3 curnt(a/d): 57 Current: 0.014(a) Aux 4 curnt(a/d): 10 Current: 0.002(a) Battery(a/d): 2972 Battery: 12.806(v) Aux(a/d): 3049 Aux: 13.117(v) Depth(a/d): 235 Depth: 0.206(m) Selector Status: 1 Motor curnt(a/d): 0 Current: 0.000(a) Aux 1 curnt(a/d): 10 Current: 0.002(a) Aux 2 curnt(a/d): 13 Current: 0.003(a) Aux 3 curnt(a/d): 58 Current: 0.014(a) Aux 4 curnt(a/d): 10 Current: 0.002(a) Battery(a/d): 2973 Battery: 12.811(v) Aux(a/d): 3049 Aux: 13.117(v) Depth(a/d): 235 Depth: 0.206(m) Selector Status: 1 SeaHorse II Ver. 1.31b Main Menu June 17, 2005 Configured CTD: Seabird SBE 19 Plus (9600_N_8_1) ---------------------------------------------- Format flash card [A] Display directory [B] Create configuration file [G] Create user header [H] Deploy SeaHorse [D] Display system data [E] Select free mode [F] Select climb mode [C] Instrument direct mode [M] Configure new CTD [N] Update system calibration [U] View system calibration [V] Test UIM [I] Seahorse calibration [S] Quit [Q] Enter selection........... [ ] ? f Selecting free Mode Free mode selected Selector: 0 Peak current: 0.525 amps SeaHorse II Ver. 1.31b Main Menu June 17, 2005 Configured CTD: Seabird SBE 19 Plus (9600_N_8_1) ---------------------------------------------- Format flash card [A] Display directory [B] Create configuration file [G] Create user header [H] Deploy SeaHorse [D] Display system data [E] Select free mode [F] Select climb mode [C] Instrument direct mode [M] Configure new CTD [N] Update system calibration [U] View system calibration [V] Test UIM [I] Seahorse calibration [S] Quit [Q] Enter selection........... [ ] ? c Selecting climb Mode Climb mode selected Selector: 1 Peak current: 0.495 amps SeaHorse II Ver. 1.31b Main Menu June 17, 2005 Configured CTD: Seabird SBE 19 Plus (9600_N_8_1) ---------------------------------------------- Format flash card [A] Display directory [B] Create configuration file [G] Create user header [H] Deploy SeaHorse [D] Display system data [E] Select free mode [F] Select climb mode [C] Instrument direct mode [M] Configure new CTD [N] Update system calibration [U] View system calibration [V] Test UIM [I] Seahorse calibration [S] Quit [Q] Enter selection........... [ ] ? f Selecting free Mode Free mode selected Selector: 0 Peak current: 0.512 amps SeaHorse II Ver. 1.31b Main Menu June 17, 2005 Configured CTD: Seabird SBE 19 Plus (9600_N_8_1) ---------------------------------------------- Format flash card [A] Display directory [B] Create configuration file [G] Create user header [H] Deploy SeaHorse [D] Display system data [E] Select free mode [F] Select climb mode [C] Instrument direct mode [M] Configure new CTD [N] Update system calibration [U] View system calibration [V] Test UIM [I] Seahorse calibration [S] Quit [Q] Enter selection........... [ ] ? m Instrument Direct Menu: ----------------------- Connect to CTD [C] Connect to MAVS [M] Quit to main menu [Q] enter selection....... [C] ? c Entering instrument ascii direct mode Press ~ to exit S>ds SeacatPlus V 1.4a SERIAL NO. 4228 31 Aug 2005 08:39:21 vbatt = 12.6, vlith = 8.5, ioper = 61.6 ma, ipump = 93.3 ma, iext01 = 38.9 ma, status = not logging number of scans to average = 1 samples = 0, free = 645277, casts = 0 mode = profile, minimum cond freq = 3150, pump delay = 0 sec ignore magnetic switch = yes battery type = ALKALINE, battery cutoff = 7.5 volts pressure sensor = strain gauge, range = 508.0 SBE 38 = no, Gas Tension Device = no Ext Volt 0 = yes, Ext Volt 1 = no, Ext Volt 2 = no, Ext Volt 3 = no echo commands = yes output format = raw HEX S> Shutting down SBE19plus Sending command STOP\r...attempt 1 of 30 STOP S> '>' prompt detected after attempt 1 Putting SBE19plus into quiescent state Sending command QS\r...attempt 1 of 1 QS Timeout on prompt 1 attempt Instrument Direct Menu: ----------------------- Connect to CTD [C] Connect to MAVS [M] Quit to main menu [Q] enter selection....... [C] ? m Entering instrument ascii direct mode Press ~ to exit  InitCF8 failed. CF8 is not installed. All flash card operations are disabled. Initializing . . . done. Loading system configuration information . . . done. Loading deployment definition information . . . done. The MAVS3 operating system is initialized and running. Type - within 30 seconds to assert operator control. 26 seconds InitCF8 failed. CF8 is not installed. All flash card operations are disabled. Initializing . . . done. Loading system configuration information . . . done. Loading deployment definition information . . . done. The MAVS3 operating system is initialized and running. Type - within 30 seconds to assert operator control. 22 seconds Current clock time: 01/01/1970 00:00:08 Change time & date (Yes/No) [N] ?Ca Nobska Development Corp. MAVS-3 Modular Acoustic Velocity Sensor Model 3 Version: mavs33_3.c S/N: 10148 IMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM; : Main Menu : HMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM< Thu Jan 1 00:00:09 1970 <1> Set Time <5> Bench Tests <2> Flash Card Ops <6> Deploy System <3> Calibration <7> Offload Data <4> Low Power Sleep <8> Contact Nobska Selection ? Instrument Direct Menu: ----------------------- Connect to CTD [C] Connect to MAVS [M] Quit to main menu [Q] enter selection....... [M] ? q SeaHorse II Ver. 1.31b Main Menu June 17, 2005 Configured CTD: Seabird SBE 19 Plus (9600_N_8_1) ---------------------------------------------- Format flash card [A] Display directory [B] Create configuration file [G] Create user header [H] Deploy SeaHorse [D] Display system data [E] Select free mode [F] Select climb mode [C] Instrument direct mode [M] Configure new CTD [N] Update system calibration [U] View system calibration [V] Test UIM [I] Seahorse calibration [S] Quit [Q] Enter selection........... [ ] ? a Do you really want to format the flash card now!!!! [Y] ? y Formatting this drive will erase all of its data! Are you sure ? y Formatting C: ... Erasing 500975 Sectors 500975 Complete Volume in drive C is NONAME Volume Serial Number is 35C5-5E3F Directory of C:\ 0 file(s) 0 bytes 0 dir(s) 256,499,712 bytes free Card formatted successfully SeaHorse II Ver. 1.31b Main Menu June 17, 2005 Configured CTD: Seabird SBE 19 Plus (9600_N_8_1) ---------------------------------------------- Format flash card [A] Display directory [B] Create configuration file [G] Create user header [H] Deploy SeaHorse [D] Display system data [E] Select free mode [F] Select climb mode [C] Instrument direct mode [M] Configure new CTD [N] Update system calibration [U] View system calibration [V] Test UIM [I] Seahorse calibration [S] Quit [Q] Enter selection........... [ ] ? q ---------------------------------------------------------------- Persistor CF21M SN 02593 PicoDOS V2.28c4 PBM V2.27 (C) 1998-2004 Persistor Instruments Inc. - www.persistor.com ---------------------------------------------------------------- C:\>dir Volume in drive C is NONAME Volume Serial Number is 35C5-5E3F Directory of C:\ 0 file(s) 0 bytes 0 dir(s) 256,499,712 bytes free C:\>yr Receiving ... CCCCComplete C:\>dir Volume in drive C is NONAME Volume Serial Number is 35C5-5E3F Directory of C:\ HEADER.TXT 335 08-31-05 9:02a 1 file(s) 335 bytes 0 dir(s) 256,495,616 bytes free C:\>date Clock reads: Wednesday, August 31, 2005 09:02:39 am C:\>date Clock reads: Wednesday, August 31, 2005 09:03:28 am C:\>yr Receiving ... CCCCComplete C:\>dir Volume in drive C is NONAME Volume Serial Number is 35C5-5E3F Directory of C:\ HEADER.TXT 335 08-31-05 9:02a CONFIG.TXT 535 08-31-05 9:04a 2 file(s) 870 bytes 0 dir(s) 256,491,520 bytes free C:\>type config.txt parameters: 8 // the number of parameters to follow first cycle: 07/27/2005 23:00:00 // mm/dd/yyyy hh:mm:ss test cycle: 1 // minutes to wait before test cycle cycle inteval: 60 // minutes rise timeout: 800 // seconds rise trigger depth: 15.0 // meters decend timeout: 60 // seconds decend trigger depth: 30 // meters surface time: 0 // seconds // must have blank line C:\> MAVS uart opened Configuration file settings: ---------------------------- Number of parameters to read: 8 First cycle set for: Wed Jul 27 23:00:00 2005 Clamp test delay set for: 1 minutes Cycle interval set for: 60 minutes Ascending timeout set for: 800 seconds Ascending trigger depth set for: 15.0 meters Descending timeout set for: 60 seconds Descending trigger depth set for: 30.0 meters Time to wait at surface set for: 0 seconds Stored calibration settings: ---------------------------- Motor current coefficient: 0.000804 Aux 1 current coefficient: 0.000242 Aux 2 current coefficient: 0.000243 Aux 3 current coefficient: 0.000243 Aux 4 current coefficient: 0.000242 Switched battery voltage coefficient: 0.004309 Switched aux voltage coefficient: 0.004302 Depth coefficient: 0.051454 Motor current offset: 0 Aux 1 current offset: 0 Aux 2 current offset: 0 Aux 3 current offset: 0 Aux 4 current offset: 0 Switched battery voltage offset: 0 Switched aux voltage offset: 0 Depth offset: 231 SeaHorse II Ver. 1.31b Next cycle will start 5 seconds from now... Press the '&' key to bypass sampling and enter the main menu... Waiting... SeaHorse II Ver. 1.31b Main Menu June 17, 2005 Configured CTD: Seabird SBE 19 Plus (9600_N_8_1) ---------------------------------------------- Format flash card [A] Display directory [B] Create configuration file [G] Create user header [H] Deploy SeaHorse [D] Display system data [E] Select free mode [F] Select climb mode [C] Instrument direct mode [M] Configure new CTD [N] Update system calibration [U] View system calibration [V] Test UIM [I] Seahorse calibration [S] Quit [Q] Enter selection........... [ ] ? d SeaHorse Deployment Setup Enter new time (mm/dd/yyyy hh:mm:ss) if time is wrong [08/31/2005 09:04:54] ? System time has not been changed System clock curently reads: Wed Aug 31 09:04:57 2005 Do you want to test the CTD [Y] ? n User header: ** Cruise: Oceanus415-2 ** Station: 1 ** Ship: R/V Oceanus ** Chief_Scientist: Greenan ** Organization: OSD ** Area_of_Operation: Sargasso Sea ** Package: SeaHorse/CTD/WetStar/MAVS ** Mooring_Number: 2 ** Latitude: 30 12.0 ** Longtitude: -67 36.0 ** Sounding: 4500 ** Profile_Direction: up ** Notes: Configuration file settings: ---------------------------- Number of parameters to read: 8 First cycle set for: Wed Jul 27 23:00:00 2005 Clamp test delay set for: 1 minutes Cycle interval set for: 60 minutes Ascending timeout set for: 800 seconds Ascending trigger depth set for: 15.0 meters Descending timeout set for: 60 seconds Descending trigger depth set for: 30.0 meters Time to wait at surface set for: 0 seconds OpFile written successfully Waiting for the clamp test Present time........... Wed Aug 31 09:05:00 2005 Clamp test at.......... Wed Aug 31 09:06:00 2005 First profile at....... Wed Jul 27 23:00:00 2005 ----------------------- Sleeping till.......... Wed Aug 31 09:06:00 2005 ----------------------- Present time........... Wed Aug 31 09:06:01 2005 Starting clamp test Selecting climb Mode Climb mode selected Selector: 1 Peak current: 0.502 amps Selecting free Mode Free mode selected Selector: 0 Peak current: 0.493 amps Clamp test complete Attention...NextCycleTime occurs before current time. The system will update NextCycleTime to the next scheduled cycle Present time........... Wed Aug 31 09:06:15 2005 Next profile at........ Wed Aug 31 10:00:00 2005 ----------------------- Sleeping till.......... Wed Aug 31 09:59:00 2005 ----------------------- MAVS uart opened Configuration file settings: ---------------------------- Number of parameters to read: 8 First cycle set for: Wed Jul 27 23:00:00 2005 Clamp test delay set for: 1 minutes Cycle interval set for: 60 minutes Ascending timeout set for: 800 seconds Ascending trigger depth set for: 15.0 meters Descending timeout set for: 60 seconds Descending trigger depth set for: 30.0 meters Time to wait at surface set for: 0 seconds Stored calibration settings: ---------------------------- Motor current coefficient: 0.000804 Aux 1 current coefficient: 0.000242 Aux 2 current coefficient: 0.000243 Aux 3 current coefficient: 0.000243 Aux 4 current coefficient: 0.000242 Switched battery voltage coefficient: 0.004309 Switched aux voltage coefficient: 0.004302 Depth coefficient: 0.051454 Motor current offset: 0 Aux 1 current offset: 0 Aux 2 current offset: 0 Aux 3 current offset: 0 Aux 4 current offset: 0 Switched battery voltage offset: 0 Switched aux voltage offset: 0 Depth offset: 231 SeaHorse II Ver. 1.31b Next cycle will start 5 seconds from now... Press the '&' key to bypass sampling and enter the main menu... Waiting... SeaHorse II Ver. 1.31b Main Menu June 17, 2005 Configured CTD: Seabird SBE 19 Plus (9600_N_8_1) ---------------------------------------------- Format flash card [A] Display directory [B] Create configuration file [G] Create user header [H] Deploy SeaHorse [D] Display system data [E] Select free mode [F] Select climb mode [C] Instrument direct mode [M] Configure new CTD [N] Update system calibration [U] View system calibration [V] Test UIM [I] Seahorse calibration [S] Quit [Q] Enter selection........... [ ] ? q ---------------------------------------------------------------- Persistor CF21M SN 02593 PicoDOS V2.28c4 PBM V2.27 (C) 1998-2004 Persistor Instruments Inc. - www.persistor.com ---------------------------------------------------------------- C:\>del config.txt C:\>del header.txt C:\>yr Receiving ... CCComplete C:\>yr Receiving ... CCComplete C:\>type header.txt ** Cruise: Oceanus415-4 ** Station: 1 ** Ship: R/V Oceanus ** Chief_Scientist: Greenan ** Organization: OSD ** Area_of_Operation: Sargasso Sea ** Package: SeaHorse/CTD/WetStar/MAVS ** Mooring_Number: 3 ** Latitude: 29 48.0 ** Longtitude: -69 01.0 ** Sounding: 5000 ** Profile_Number: ** Profile_Direction: up ** Notes: C:\>type config.txt parameters: 8 // the number of parameters to follow first cycle: 08/31/2005 14:00:00 // mm/dd/yyyy hh:mm:ss test cycle: 1 // minutes to wait before test cycle cycle inteval: 60 // minutes rise timeout: 800 // seconds rise trigger depth: 15.0 // meters decend timeout: 60 // seconds decend trigger depth: 30 // meters surface time: 0 // seconds // must have blank line C:\>del config.txt C:\>dir Volume in drive C is NONAME Volume Serial Number is 35C5-5E3F Directory of C:\ HEADER.TXT 335 08-31-05 9:08a TESTFILE.001 0 08-31-05 9:07a OPFILE.TXT 13 08-31-05 9:04a 3 file(s) 348 bytes 0 dir(s) 256,491,520 bytes free C:\> MAVS uart opened Unable to open configuration data file... Error reading file configuration Stored calibration settings: ---------------------------- Motor current coefficient: 0.000804 Aux 1 current coefficient: 0.000242 Aux 2 current coefficient: 0.000243 Aux 3 current coefficient: 0.000243 Aux 4 current coefficient: 0.000242 Switched battery voltage coefficient: 0.004309 Switched aux voltage coefficient: 0.004302 Depth coefficient: 0.051454 Motor current offset: 0 Aux 1 current offset: 0 Aux 2 current offset: 0 Aux 3 current offset: 0 Aux 4 current offset: 0 Switched battery voltage offset: 0 Switched aux voltage offset: 0 Depth offset: 231 SeaHorse II Ver. 1.31b Next cycle will start 5 seconds from now... Press the '&' key to bypass sampling and enter the main menu... Waiting... SeaHorse II Ver. 1.31b Main Menu June 17, 2005 Configured CTD: Seabird SBE 19 Plus (9600_N_8_1) ---------------------------------------------- Format flash card [A] Display directory [B] Create configuration file [G] Create user header [H] Deploy SeaHorse [D] Display system data [E] Select free mode [F] Select climb mode [C] Instrument direct mode [M] Configure new CTD [N] Update system calibration [U] View system calibration [V] Test UIM [I] Seahorse calibration [S] Quit [Q] Enter selection........... [ ] ? q ---------------------------------------------------------------- Persistor CF21M SN 02593 PicoDOS V2.28c4 PBM V2.27 (C) 1998-2004 Persistor Instruments Inc. - www.persistor.com ---------------------------------------------------------------- C:\>date Clock reads: Wednesday, August 31, 2005 03:05:21 pm C:\>yr Receiving ... CCComplete C:\>type config.txt parameters: 8 // the number of parameters to follow first cycle: 08/31/2005 16:00:00 // mm/dd/yyyy hh:mm:ss test cycle: 1 // minutes to wait before test cycle cycle inteval: 60 // minutes rise timeout: 800 // seconds rise trigger depth: 15.0 // meters decend timeout: 60 // seconds decend trigger depth: 30 // meters surface time: 0 // seconds // must have blank line C:\> MAVS uart opened Configuration file settings: ---------------------------- Number of parameters to read: 8 First cycle set for: Wed Aug 31 16:00:00 2005 Clamp test delay set for: 1 minutes Cycle interval set for: 60 minutes Ascending timeout set for: 800 seconds Ascending trigger depth set for: 15.0 meters Descending timeout set for: 60 seconds Descending trigger depth set for: 30.0 meters Time to wait at surface set for: 0 seconds Stored calibration settings: ---------------------------- Motor current coefficient: 0.000804 Aux 1 current coefficient: 0.000242 Aux 2 current coefficient: 0.000243 Aux 3 current coefficient: 0.000243 Aux 4 current coefficient: 0.000242 Switched battery voltage coefficient: 0.004309 Switched aux voltage coefficient: 0.004302 Depth coefficient: 0.051454 Motor current offset: 0 Aux 1 current offset: 0 Aux 2 current offset: 0 Aux 3 current offset: 0 Aux 4 current offset: 0 Switched battery voltage offset: 0 Switched aux voltage offset: 0 Depth offset: 231 SeaHorse II Ver. 1.31b Next cycle will start 5 seconds from now... Press the '&' key to bypass sampling and enter the main menu... Waiting... SeaHorse II Ver. 1.31b Main Menu June 17, 2005 Configured CTD: Seabird SBE 19 Plus (9600_N_8_1) ---------------------------------------------- Format flash card [A] Display directory [B] Create configuration file [G] Create user header [H] Deploy SeaHorse [D] Display system data [E] Select free mode [F] Select climb mode [C] Instrument direct mode [M] Configure new CTD [N] Update system calibration [U] View system calibration [V] Test UIM [I] Seahorse calibration [S] Quit [Q] Enter selection........... [ ] ? d SeaHorse Deployment Setup Enter new time (mm/dd/yyyy hh:mm:ss) if time is wrong [08/31/2005 15:06:28] ? System time has not been changed System clock curently reads: Wed Aug 31 15:06:32 2005 Do you want to test the CTD [Y] ? n User header: ** Cruise: Oceanus415-4 ** Station: 1 ** Ship: R/V Oceanus ** Chief_Scientist: Greenan ** Organization: OSD ** Area_of_Operation: Sargasso Sea ** Package: SeaHorse/CTD/WetStar/MAVS ** Mooring_Number: 3 ** Latitude: 29 48.0 ** Longtitude: -69 01.0 ** Sounding: 5000 ** Profile_Direction: up ** Notes: Configuration file settings: ---------------------------- Number of parameters to read: 8 First cycle set for: Wed Aug 31 16:00:00 2005 Clamp test delay set for: 1 minutes Cycle interval set for: 60 minutes Ascending timeout set for: 800 seconds Ascending trigger depth set for: 15.0 meters Descending timeout set for: 60 seconds Descending trigger depth set for: 30.0 meters Time to wait at surface set for: 0 seconds OpFile written successfully Waiting for the clamp test Present time........... Wed Aug 31 15:06:35 2005 Clamp test at.......... Wed Aug 31 15:07:35 2005 First profile at....... Wed Aug 31 16:00:00 2005 ----------------------- Sleeping till.......... Wed Aug 31 15:07:35 2005