PSA file: C:\Program Files\Sea-Bird_V7\SeasaveV7\Tans_OA_GoM.psa Date: 05/01/2014 Instrument configuration file: D:\Data\CTD Config Files (DO NOT REMOVE!)\Tioga-20140128\090749_20130318_w_Transm_noOxygen.con Configuration report for SBE 911plus/917plus CTD ------------------------------------------------ Frequency channels suppressed : 2 Voltage words suppressed : 0 Computer interface : RS-232C Scans to average : 1 NMEA position data added : Yes NMEA depth data added : No NMEA time added : No NMEA device connected to : deck unit Surface PAR voltage added : Yes Scan time added : No 1) Frequency 0, Temperature Serial number : 5166 Calibrated on : 10-Oct-13 G : 4.41511954e-003 H : 6.45200536e-004 I : 2.23666152e-005 J : 2.29918251e-006 F0 : 1000.000 Slope : 1.00000000 Offset : 0.0000 2) Frequency 1, Conductivity Serial number : 3093 Calibrated on : 09-Oct-13 G : -9.79629167e+000 H : 1.37656533e+000 I : -2.10798871e-005 J : 7.04990222e-005 CTcor : 3.2500e-006 CPcor : -9.57000000e-008 Slope : 1.00000000 Offset : 0.00000 3) Frequency 2, Pressure, Digiquartz with TC Serial number : 0484 Calibrated on : 01-Mar-13 C1 : -4.680530e+004 C2 : -8.320595e-001 C3 : 1.450810e-002 D1 : 3.903100e-002 D2 : 0.000000e+000 T1 : 3.038361e+001 T2 : -5.411459e-004 T3 : 4.085080e-006 T4 : 2.564540e-009 T5 : 0.000000e+000 Slope : 0.99987529 Offset : 0.07578 AD590M : 1.280820e-002 AD590B : -9.210200e+000 4) A/D voltage 0, Fluorometer, Wetlab ECO-AFL/FL Serial number : FLRTD-364 Calibrated on : 3/28/2011 Vblank : 0.0210 Scale factor : 2.50000000e+001 5) A/D voltage 1, Transmissometer, Chelsea/Seatech/Wetlab CStar Serial number : CST-1116DR Calibrated on : 07 Sep 2011 M : 21.6029 B : -1.2962 Path length : 0.250 6) A/D voltage 2, Free 7) A/D voltage 3, Free 8) A/D voltage 4, Altimeter Serial number : PSA916D s/n 40849 Calibrated on : sw1-8: 01110000 Scale factor : 15.000 Offset : 0.200 9) A/D voltage 5, OBS, Seapoint Turbidity Serial number : STM 10425 Calibrated on : Gain setting : 100 x Scale factor : 1.000 10) A/D voltage 6, Free 11) A/D voltage 7, Free 12) SPAR voltage, Unavailable 13) SPAR voltage, SPAR/Surface Irradiance Serial number : Calibrated on : Conversion factor : 0.00000000 Ratio multiplier : 0.00000000 --------------------------------------------- Pump Control This setting is only applicable to a custom build of the SBE 9plus. Enable pump on / pump off commands: NO --------------------------------------------- Data Acquisition: Archive data: YES Delay archiving: NO Data archive: D:\Data\ctd\ti_747_decktest.hex Timeout (seconds) at startup: 20 Timeout (seconds) between scans: 20 --------------------------------------------- Instrument port configuration: Port = COM10 Baud rate = 19200 Parity = N Data bits = 8 Stop bits = 1 --------------------------------------------- Water Sampler Data: Water Sampler Type: SBE Carousel Number of bottles: 12 Port: COM1 Enable remote firing: NO Firing sequence: Sequential Tone for bottle fire confirmation uses PC internal speakers. --------------------------------------------- Header information: Header Choice = Prompt for Header Information --------------------------------------------- TCP/IP - port numbers: Data acquisition: Data port: 49163 Status port: 49165 Command port: 49164 Remote bottle firing: Command port: 49167 Status port: 49168 Remote data publishing: Converted data port: 49161 Raw data port: 49160 --------------------------------------------- Miscellaneous data for calculations Depth and Average Sound Velocity Latitude when NMEA is not available: 41.00000000 Average Sound Velocity Minimum pressure [db]: 20.00000000 Minimum salinity [psu]: 20.00000000 Pressure window size [db]: 20.00000000 Time window size [s]: 60.00000000 Descent and Acceleration Window size [s]: 2.00000000 Plume Anomaly Theta-B: 0.00000000 Salinity-B 0.00000000 Theta-Z / Salinity-Z 0.00000000 Reference pressure [db] 0.00000000 Oxygen Window size [s]: 2.00000000 Potential Temperature Anomaly A0: 0.00000000 A1: 0.00000000 A1 Multiplier: Salinity --------------------------------------------- Serial Data Output: Output data to serial port: NO --------------------------------------------- Mark Variables: No variables are selected. --------------------------------------------- Shared File Output: Output data to shared file: NO --------------------------------------------- TCP/IP Output: Raw data: Output raw data to socket: NO XML wrapper and settings: NO Seconds between raw data updates: 0.00000000 Converted data: Output converted data to socket: NO XML format: NO --------------------------------------------- SBE 11plus Deck Unit Alarms Enable minimum pressure alarm: NO Enable maximum pressure alarm: NO Enable altimeter alarm: NO --------------------------------------------- SBE 14 Remote Display Enable SBE 14 Remote Display: NO --------------------------------------------- PC Alarms Enable minimum pressure alarm: NO Enable maximum pressure alarm: NO Enable altimeter alarm: NO Enable bottom contact alarm: NO Alarm uses PC sound card. --------------------------------------------- Options: Prompt to save program setup changes: YES Automatically save program setup changes on exit: NO Confirm instrument configuration change: YES Confirm display setup changes: YES Confirm output file overwrite: YES Check scan length: YES Compare serial numbers: YES Maximized plot may cover Seasave: NO