PSA file: C:\data\Seasave_471-01.psa Date: 04/28/2011 Instrument configuration file: C:\data\ctd484.con Configuration report for SBE 911plus/917plus CTD ------------------------------------------------ Frequency channels suppressed : 0 Voltage words suppressed : 0 Computer interface : RS-232C Scans to average : 1 NMEA position data added : Yes NMEA depth data added : No NMEA time added : No NMEA device connected to : deck unit Surface PAR voltage added : Yes Scan time added : No 1) Frequency 0, Temperature Serial number : 2534 Calibrated on : 13-Dec-10 G : 4.34818148e-003 H : 6.42236921e-004 I : 2.25303923e-005 J : 2.00267179e-006 F0 : 1000.000 Slope : 1.00000000 Offset : 0.0000 2) Frequency 1, Conductivity Serial number : 1860 Calibrated on : 08-Dec-10 G : -3.99855665e+000 H : 5.16315236e-001 I : -4.69128445e-004 J : 5.12787325e-005 CTcor : 3.2500e-006 CPcor : -9.57000000e-008 Slope : 1.00000000 Offset : 0.00000 3) Frequency 2, Pressure, Digiquartz with TC Serial number : 69685 in 090484 vertical orientation Calibrated on : 12/18/2002 C1 : -4.680530e+004 C2 : -8.320595e-001 C3 : 1.450810e-002 D1 : 3.903100e-002 D2 : 0.000000e+000 T1 : 3.038361e+001 T2 : -5.411459e-004 T3 : 4.085080e-006 T4 : 2.564540e-009 T5 : 0.000000e+000 Slope : 0.99995000 Offset : 0.00000 AD590M : 1.280820e-002 AD590B : -9.210198e+000 4) Frequency 3, Temperature, 2 Serial number : 4035 Calibrated on : 09-Dec-10 G : 4.40699833e-003 H : 6.49936653e-004 I : 2.32820300e-005 J : 2.02719382e-006 F0 : 1000.000 Slope : 1.00000000 Offset : 0.0000 5) Frequency 4, Conductivity, 2 Serial number : 2147 Calibrated on : 08-Dec-10 G : -1.00345209e+001 H : 1.39977308e+000 I : -1.77088109e-003 J : 1.91980251e-004 CTcor : 3.2500e-006 CPcor : -9.57000000e-008 Slope : 1.00000000 Offset : 0.00000 6) A/D voltage 0, Fluorometer, Wetlab ECO-AFL/FL Serial number : FLNTURTD-1013 Calibrated on : april 18, 2008 Vblank : 0.0800 Scale factor : 6.00000000e+000 7) A/D voltage 1, User Polynomial Serial number : FLNTURTD-1013 Calibrated on : april 18, 2008 Sensor name : turbidity A0 : 0.15800000 A1 : 2.00000000 A2 : 0.00000000 A3 : 0.00000000 8) A/D voltage 2, PAR/Irradiance, Biospherical/Licor Serial number : 4553 Calibrated on : 11-Mar-2008 M : 1.00000000 B : 0.00000000 Calibration constant : 1700700000.00000000 Multiplier : 1.00000000 Offset : -0.77870000 9) A/D voltage 3, Transmissometer, Chelsea/Seatech/Wetlab CStar Serial number : 758 Calibrated on : 14-Jul-2004 M : 26.1452 B : -1.4118 Path length : 0.250 10) A/D voltage 4, Altimeter Serial number : 1133 Calibrated on : Scale factor : 14.950 Offset : 0.200 11) A/D voltage 5, Oxygen, SBE 43 Serial number : 1960 Calibrated on : 24-Sep-10p Equation : Sea-Bird Soc : 4.57600e-001 Offset : -4.92300e-001 A : -3.70820e-003 B : 2.16870e-004 C : -4.23800e-006 E : 3.60000e-002 Tau20 : 1.82000e+000 D1 : 1.92630e-004 D2 : -4.64800e-002 H1 : -3.30000e-002 H2 : 5.00000e+003 H3 : 1.45000e+003 12) A/D voltage 6, Free 13) A/D voltage 7, Free 14) SPAR voltage, Unavailable 15) SPAR voltage, SPAR/Surface Irradiance Serial number : 16500 Calibrated on : 2008-04-14 Conversion factor : 1653.88950000 Ratio multiplier : 1.00000000 --------------------------------------------- Pump Control This setting is only applicable to a custom build of the SBE 9plus. Enable pump on / pump off commands: NO --------------------------------------------- Data Acquisition: Archive data: YES Delay archiving: NO Data archive: C:\data\oc47101004.hex Timeout (seconds) at startup: 20 Timeout (seconds) between scans: 20 --------------------------------------------- Instrument port configuration: Port = COM1 Baud rate = 19200 Parity = N Data bits = 8 Stop bits = 1 --------------------------------------------- Water Sampler Data: Water Sampler Type: SBE Carousel Number of bottles: 24 Port: COM2 Enable remote firing: NO Firing sequence: Sequential Tone for bottle fire confirmation uses PC sound card. --------------------------------------------- Header information: Header Choice = Prompt for Header Information --------------------------------------------- TCP/IP - port numbers: Data acquisition: Data port: 49163 Status port: 49165 Command port: 49164 Remote bottle firing: Command port: 49167 Status port: 49168 Remote data publishing: Converted data port: 49161 Raw data port: 49160 --------------------------------------------- Miscellaneous data for calculations Depth and Average Sound Velocity Latitude when NMEA is not available: 0.00000000 Average Sound Velocity Minimum pressure [db]: 20.00000000 Minimum salinity [psu]: 20.00000000 Pressure window size [db]: 20.00000000 Time window size [s]: 60.00000000 Descent and Acceleration Window size [s]: 2.00000000 Plume Anomaly Theta-B: 0.00000000 Salinity-B 0.00000000 Theta-Z / Salinity-Z 0.00000000 Reference pressure [db] 0.00000000 Oxygen Window size [s]: 2.00000000 Apply hysteresis correction: 1 Apply Tau correction: 1 Potential Temperature Anomaly A0: 0.00000000 A1: 0.00000000 A1 Multiplier: Salinity --------------------------------------------- Serial Data Output: Output data to serial port: NO --------------------------------------------- Mark Variables: No variables are selected. --------------------------------------------- Shared File Output: Output data to shared file: NO --------------------------------------------- TCP/IP Output: Raw data: Output raw data to socket: NO XML wrapper and settings: NO Seconds between raw data updates: 0.00000000 Converted data: Output converted data to socket: NO XML format: NO --------------------------------------------- SBE 11plus Deck Unit Alarms Enable minimum pressure alarm: NO Enable maximum pressure alarm: NO Enable altimeter alarm: NO --------------------------------------------- SBE 14 Remote Display Enable SBE 14 Remote Display: NO --------------------------------------------- PC Alarms Enable minimum pressure alarm: NO Enable maximum pressure alarm: NO Enable altimeter alarm: NO Enable bottom contact alarm: NO Alarm uses PC sound card. --------------------------------------------- Options: Prompt to save program setup changes: YES Automatically save program setup changes on exit: NO Confirm instrument configuration change: YES Confirm display setup changes: YES Confirm output file overwrite: YES Check scan length: YES Compare serial numbers: YES Maximized plot may cover Seasave: NO