PSA file: C:\data\oc449-10.psa Date: 12/16/2008 Instrument configuration file: C:\data\oc449-10.con Configuration report for SBE 911plus/917plus CTD ------------------------------------------------ Frequency channels suppressed : 0 Voltage words suppressed : 0 Computer interface : RS-232C Scans to average : 1 Surface PAR voltage added : Yes NMEA position data added : Yes Scan time added : No 1) Frequency 0, Temperature Serial number : 4491 Calibrated on : 2008-03-20 G : 4.42658943e-003 H : 6.46593913e-004 I : 2.27195718e-005 J : 1.97101572e-006 F0 : 1000.000 Slope : 1.00000000 Offset : 0.0000 2) Frequency 1, Conductivity Serial number : 3009 Calibrated on : 2008-03-12 G : -1.04866587e+001 H : 1.48767663e+000 I : 3.64837243e-004 J : 5.15887303e-005 CTcor : 3.2500e-006 CPcor : -9.57000000e-008 Slope : 1.00000000 Offset : 0.00000 3) Frequency 2, Pressure, Digiquartz with TC Serial number : 69685 in 090484 vertical orientation Calibrated on : 12/18/2002 C1 : -4.680530e+004 C2 : -8.320595e-001 C3 : 1.450810e-002 D1 : 3.903100e-002 D2 : 0.000000e+000 T1 : 3.038361e+001 T2 : -5.411459e-004 T3 : 4.085080e-006 T4 : 2.564540e-009 T5 : 0.000000e+000 Slope : 0.99995000 Offset : 0.00000 AD590M : 1.280820e-002 AD590B : -9.210198e+000 4) Frequency 3, Temperature, 2 Serial number : 4492 Calibrated on : 2008-03-11 G : 4.33915675e-003 H : 6.33532938e-004 I : 2.03952959e-005 J : 1.73429072e-006 F0 : 1000.000 Slope : 1.00000000 Offset : 0.0000 5) Frequency 4, Conductivity, 2 Serial number : 2824 Calibrated on : 2008-03-12 G : -1.01342866e+001 H : 1.40229723e+000 I : 6.20167839e-004 J : 2.77801637e-005 CTcor : 3.2500e-006 CPcor : -9.57000000e-008 Slope : 1.00000000 Offset : 0.00000 6) A/D voltage 0, Fluorometer, Wetlab ECO-AFL/FL Serial number : FLNTURTD-1012 Calibrated on : 2008-04-18 Vblank : 0.0820 Scale factor : 6.00000000e+000 7) A/D voltage 1, User Polynomial Serial number : FLNTURTD-1012 Calibrated on : 2008-04-18 Sensor name : WetLabs Turbidity A0 : -0.14600000 A1 : 2.00000000 A2 : 0.00000000 A3 : 0.00000000 8) A/D voltage 2, Free 9) A/D voltage 3, Transmissometer, Chelsea/Seatech/Wetlab CStar Serial number : CST-1117DR Calibrated on : 2008-04-30 M : 21.7010 B : -1.3670 Path length : 0.250 10) A/D voltage 4, Altimeter Serial number : 1133 Calibrated on : Scale factor : 14.950 Offset : 0.200 11) A/D voltage 5, Oxygen, SBE 43 Serial number : 264 Calibrated on : 2008-03-15 Equation : Murphy-Larson Coefficients for Owens-Millard: Soc : 4.3770e-001 Boc : 0.0000 Offset : -0.5792 Tcor : 0.0004 Pcor : 1.35e-004 Tau : 0.0 Coefficients for Murphy-Larson: Soc : 4.37700e-001 Offset : -5.79200e-001 A : -2.96880e-003 B : 1.33370e-004 C : -3.04520e-006 E : 3.60000e-002 Tau : 0.00000e+000 12) A/D voltage 6, Free 13) A/D voltage 7, Free 14) SPAR voltage, Unavailable 15) SPAR voltage, SPAR/Surface Irradiance Serial number : Calibrated on : Conversion factor : 0.00000000 Ratio multiplier : 0.00000000 --------------------------------------------- Pump Control This setting is only applicable to a custom build of the SBE 9plus. Enable pump on / pump off commands: NO --------------------------------------------- Data Acquisition: Archive data: YES Delay archiving: NO Data archive: C:\data\gf242c6.hex Timeout (seconds) at startup: 20 Timeout (seconds) between scans: 20 --------------------------------------------- Instrument port configuration: Port = COM1 Baud rate = 19200 Parity = N Data bits = 8 Stop bits = 1 --------------------------------------------- Water Sampler Data: Water Sampler Type: SBE Carousel Number of bottles: 24 Port: COM2 Enable remote firing: NO Firing sequence: Sequential --------------------------------------------- Header information: Header Choice = Prompt for Header Information --------------------------------------------- TCP/IP - port numbers: Data acquisition: Data port: 49163 Status port: 49165 Command port: 49164 Remote bottle firing: Command port: 49167 Status port: 49168 Remote data publishing: Converted data port: 49161 Raw data port: 49160 --------------------------------------------- Miscellaneous data for calculations Depth and Average Sound Velocity Latitude when NMEA is not available: 0.00000000 Average Sound Velocity Minimum pressure [db]: 20.00000000 Minimum salinity [psu]: 20.00000000 Pressure window size [db]: 20.00000000 Time window size [s]: 60.00000000 Descent and Acceleration Window size [s]: 2.00000000 Plume Anomaly Theta-B: 0.00000000 Salinity-B 0.00000000 Theta-Z / Salinity-Z 0.00000000 Reference pressure [db] 0.00000000 Oxygen Window size [s]: 2.00000000 Potential Temperature Anomaly A0: 0.00000000 A1: 0.00000000 A1 Multiplier: Salinity --------------------------------------------- Serial Data Output: Output data to serial port: NO --------------------------------------------- Mark Variables: No variables are selected. --------------------------------------------- Shared File Output: Output data to shared file: NO --------------------------------------------- TCP/IP Output: Raw data: Output raw data to socket: NO XML wrapper and settings: NO Seconds between raw data updates: 0.00000000 Converted data: Output converted data to socket: YES XML format: YES Seconds between converted data updates: 0.00000000 Variables: Digits Variable Name [units] ------ --------------------- 4 Depth [salt water, m] 3 Altimeter [m] 0 Bottles Fired --------------------------------------------- SBE 11plus Deck Unit Alarms Enable minimum pressure alarm: NO Enable maximum pressure alarm: NO Enable altimeter alarm: NO --------------------------------------------- SBE 14 Remote Display Enable SBE 14 Remote Display: NO --------------------------------------------- Options: Prompt to save program setup changes: YES Automatically save program setup changes on exit: NO Confirm instrument configuration change: YES Confirm display setup changes: YES Confirm output file overwrite: YES Check scan length: YES Compare serial numbers: YES Maximized plot may cover Seasave: NO