04/04/2008 03:43:32 SeasaveAcq is starting up.
04/04/2008 03:43:32 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/04/2008 03:43:42 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/04/2008 03:43:58 FFFFFFFF Unsupported modem message: FE 20 B0 from SBECarousel
04/04/2008 03:44:03 COM1 has been reset.
04/04/2008 03:44:03 CDataAcquisitionThread::Stop() took approximately    0.0 seconds.
04/04/2008 03:44:04 CModemPort::Cleanup() - COM2 has been reset.
04/04/2008 03:44:04 CModemPort::Cleanup() - COM2 has been reset.
04/04/2008 03:44:04 SeasaveAcq is shutting down.

04/04/2008 12:15:08 SeasaveAcq is starting up.
04/04/2008 12:15:09 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/04/2008 12:15:18 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/04/2008 12:16:30 COM1 has been reset.
04/04/2008 12:16:30 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/04/2008 12:16:30 CModemPort::Cleanup() - COM2 has been reset.
04/04/2008 12:16:30 CModemPort::Cleanup() - COM2 has been reset.
04/04/2008 12:16:30 SeasaveAcq is shutting down.

04/04/2008 12:42:57 SeasaveAcq is starting up.
04/04/2008 12:42:58 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/04/2008 12:43:07 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/04/2008 12:43:38 COM1 has been reset.
04/04/2008 12:43:38 CDataAcquisitionThread::Stop() took approximately    0.2 seconds.
04/04/2008 12:43:38 CModemPort::Cleanup() - COM2 has been reset.
04/04/2008 12:43:38 CModemPort::Cleanup() - COM2 has been reset.
04/04/2008 12:43:38 SeasaveAcq is shutting down.

04/04/2008 14:33:02 SeasaveAcq is starting up.
04/04/2008 14:33:02 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/04/2008 14:33:12 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/04/2008 14:34:05 COM1 has been reset.
04/04/2008 14:34:05 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/04/2008 14:34:05 CModemPort::Cleanup() - COM2 has been reset.
04/04/2008 14:34:05 CModemPort::Cleanup() - COM2 has been reset.
04/04/2008 14:34:05 SeasaveAcq is shutting down.

04/04/2008 14:45:21 SeasaveAcq is starting up.
04/04/2008 14:45:22 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/04/2008 14:45:31 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/04/2008 14:46:38 COM1 has been reset.
04/04/2008 14:46:38 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/04/2008 14:46:38 CModemPort::Cleanup() - COM2 has been reset.
04/04/2008 14:46:38 CModemPort::Cleanup() - COM2 has been reset.
04/04/2008 14:46:38 SeasaveAcq is shutting down.

04/04/2008 14:47:46 SeasaveAcq is starting up.
04/04/2008 14:47:46 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/04/2008 14:47:56 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/04/2008 14:49:15 COM1 has been reset.
04/04/2008 14:49:16 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/04/2008 14:49:16 CModemPort::Cleanup() - COM2 has been reset.
04/04/2008 14:49:16 CModemPort::Cleanup() - COM2 has been reset.
04/04/2008 14:49:16 SeasaveAcq is shutting down.

04/04/2008 18:02:02 SeasaveAcq is starting up.
04/04/2008 18:02:03 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/04/2008 18:02:12 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/04/2008 18:12:10 COM1 has been reset.
04/04/2008 18:12:10 CDataAcquisitionThread::Stop() took approximately    0.2 seconds.
04/04/2008 18:12:10 CModemPort::Cleanup() - COM2 has been reset.
04/04/2008 18:12:10 CModemPort::Cleanup() - COM2 has been reset.
04/04/2008 18:12:10 SeasaveAcq is shutting down.

04/04/2008 19:21:38 SeasaveAcq is starting up.
04/04/2008 19:21:38 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/04/2008 19:21:48 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/04/2008 19:21:50 CRS232::GetNMEALine failed - BUFFER: "S", c = 53, i = 1
04/04/2008 19:21:50 C911Plus::InitializeNMEA_GetThreeLines() failed: nResult = 0
04/04/2008 19:21:50 C911Plus::InitializeNMEA() failed - 1
04/04/2008 19:21:50 failed to initialize NMEA
04/04/2008 19:21:50 COM1 has been reset.
04/04/2008 19:21:50 CDataAcquisitionThread::Stop() took approximately    9.4 seconds.
04/04/2008 19:21:50 CModemPort::Cleanup() - COM2 has been reset.
04/04/2008 19:21:51 CModemPort::Cleanup() - COM2 has been reset.
04/04/2008 19:21:51 SeasaveAcq is shutting down.

04/04/2008 19:22:15 SeasaveAcq is starting up.
04/04/2008 19:22:15 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/04/2008 19:22:25 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/04/2008 19:31:16 FFFFFFFF Unsupported modem message: FA 00 DA from SBECarousel
04/04/2008 19:31:21 COM1 has been reset.
04/04/2008 19:31:21 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/04/2008 19:31:21 CModemPort::Cleanup() - COM2 has been reset.
04/04/2008 19:31:21 CModemPort::Cleanup() - COM2 has been reset.
04/04/2008 19:31:21 SeasaveAcq is shutting down.

04/04/2008 19:55:28 SeasaveAcq is starting up.
04/04/2008 19:55:29 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/04/2008 19:55:39 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/04/2008 19:56:08 CSBECarousel::InitializeWaterSampler() failed: cur = 47F679C8, start = 47F679AB
04/04/2008 19:56:08 Failed to initialize water sampler
04/04/2008 19:56:08 COM1 has been reset.
04/04/2008 19:56:08 CDataAcquisitionThread::Stop() took approximately    0.2 seconds.
04/04/2008 19:56:08 CModemPort::Cleanup() - COM2 has been reset.
04/04/2008 19:56:08 CModemPort::Cleanup() - COM2 has been reset.
04/04/2008 19:56:08 SeasaveAcq is shutting down.

04/04/2008 20:07:16 SeasaveAcq is starting up.
04/04/2008 20:19:27 SeasaveAcq is shutting down.

04/04/2008 23:32:40 SeasaveAcq is starting up.
04/04/2008 23:32:41 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/04/2008 23:32:51 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/04/2008 23:38:36 COM1 has been reset.
04/04/2008 23:38:36 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/04/2008 23:38:36 CModemPort::Cleanup() - COM2 has been reset.
04/04/2008 23:38:36 CModemPort::Cleanup() - COM2 has been reset.
04/04/2008 23:38:36 SeasaveAcq is shutting down.

04/05/2008 05:39:52 SeasaveAcq is starting up.
04/05/2008 05:39:52 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/05/2008 05:40:03 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/05/2008 05:40:04 COM1 has been reset.
04/05/2008 05:40:04 CDataAcquisitionThread::Stop() took approximately    4.6 seconds.
04/05/2008 05:40:04 CModemPort::Cleanup() - COM2 has been reset.
04/05/2008 05:40:04 CModemPort::Cleanup() - COM2 has been reset.
04/05/2008 05:40:04 SeasaveAcq is shutting down.

04/05/2008 05:46:22 SeasaveAcq is starting up.
04/05/2008 05:46:22 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/05/2008 05:46:32 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/05/2008 05:46:56 FFFFFFFF Unsupported modem message: 44 88 FD from SBECarousel
04/05/2008 11:41:46 COM1 has been reset.
04/05/2008 11:41:46 CDataAcquisitionThread::Stop() took approximately    0.0 seconds.
04/05/2008 11:41:46 CModemPort::Cleanup() - COM2 has been reset.
04/05/2008 11:41:46 CModemPort::Cleanup() - COM2 has been reset.
04/05/2008 11:41:46 SeasaveAcq is shutting down.

04/05/2008 12:04:41 SeasaveAcq is starting up.
04/05/2008 12:04:42 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/05/2008 12:04:52 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/05/2008 12:05:01 Warning: Closing the serial port may have failed.  It may be necessary to restart your computer.
04/05/2008 12:05:01 CSBECarousel::InitializeWaterSampler() failed: cur = 47F75CDD, start = 47F75CD4
04/05/2008 12:05:01 Failed to initialize water sampler
04/05/2008 12:05:01 COM1 has been reset.

04/05/2008 12:37:25 SeasaveAcq is starting up.
04/05/2008 12:37:26 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/05/2008 12:37:36 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/05/2008 12:50:28 COM1 has been reset.
04/05/2008 12:50:28 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/05/2008 12:50:28 CModemPort::Cleanup() - COM2 has been reset.
04/05/2008 12:50:28 CModemPort::Cleanup() - COM2 has been reset.
04/05/2008 12:50:28 SeasaveAcq is shutting down.

04/05/2008 14:02:15 SeasaveAcq is starting up.
04/05/2008 14:02:16 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/05/2008 14:02:26 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/05/2008 14:17:05 COM1 has been reset.
04/05/2008 14:17:05 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/05/2008 14:17:05 CModemPort::Cleanup() - COM2 has been reset.
04/05/2008 14:17:05 CModemPort::Cleanup() - COM2 has been reset.
04/05/2008 14:17:05 SeasaveAcq is shutting down.

04/05/2008 19:52:18 SeasaveAcq is starting up.
04/05/2008 19:52:18 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/05/2008 19:52:28 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/05/2008 20:29:33 COM1 has been reset.
04/05/2008 20:29:33 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/05/2008 20:29:33 CModemPort::Cleanup() - COM2 has been reset.
04/05/2008 20:29:33 CModemPort::Cleanup() - COM2 has been reset.
04/05/2008 20:29:33 SeasaveAcq is shutting down.

04/06/2008 01:49:34 SeasaveAcq is starting up.
04/06/2008 01:49:35 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/06/2008 01:49:45 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/06/2008 02:02:43 COM1 has been reset.
04/06/2008 02:02:43 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/06/2008 02:02:43 CModemPort::Cleanup() - COM2 has been reset.
04/06/2008 02:02:43 CModemPort::Cleanup() - COM2 has been reset.
04/06/2008 02:02:43 SeasaveAcq is shutting down.

04/06/2008 03:00:05 SeasaveAcq is starting up.
04/06/2008 03:00:05 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/06/2008 03:00:15 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/06/2008 03:15:04 COM1 has been reset.
04/06/2008 03:15:04 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/06/2008 03:15:04 CModemPort::Cleanup() - COM2 has been reset.
04/06/2008 03:15:04 CModemPort::Cleanup() - COM2 has been reset.
04/06/2008 03:15:04 SeasaveAcq is shutting down.

04/06/2008 10:16:57 SeasaveAcq is starting up.
04/06/2008 10:16:57 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/06/2008 10:17:08 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/06/2008 10:31:44 COM1 has been reset.
04/06/2008 10:31:44 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/06/2008 10:31:44 CModemPort::Cleanup() - COM2 has been reset.
04/06/2008 10:31:44 CModemPort::Cleanup() - COM2 has been reset.
04/06/2008 10:31:44 SeasaveAcq is shutting down.

04/06/2008 11:26:12 SeasaveAcq is starting up.
04/06/2008 11:26:13 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/06/2008 11:26:23 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/06/2008 11:47:13 COM1 has been reset.
04/06/2008 11:47:13 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/06/2008 11:47:13 CModemPort::Cleanup() - COM2 has been reset.
04/06/2008 11:47:13 CModemPort::Cleanup() - COM2 has been reset.
04/06/2008 11:47:13 SeasaveAcq is shutting down.

04/06/2008 20:28:20 SeasaveAcq is starting up.
04/06/2008 20:28:21 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/06/2008 20:28:31 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/06/2008 20:44:56 COM1 has been reset.
04/06/2008 20:44:56 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/06/2008 20:44:56 CModemPort::Cleanup() - COM2 has been reset.
04/06/2008 20:44:56 CModemPort::Cleanup() - COM2 has been reset.
04/06/2008 20:44:56 SeasaveAcq is shutting down.

04/06/2008 21:25:20 SeasaveAcq is starting up.
04/06/2008 21:25:20 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/06/2008 21:25:30 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/06/2008 21:42:38 FFFFFFFF Unsupported modem message: FF 06 40 from SBECarousel
04/06/2008 21:45:53 FFFFFFFF Unsupported modem message: 06 23 06 from SBECarousel
04/06/2008 21:46:28 COM1 has been reset.
04/06/2008 21:46:28 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/06/2008 21:46:28 CModemPort::Cleanup() - COM2 has been reset.
04/06/2008 21:46:28 CModemPort::Cleanup() - COM2 has been reset.
04/06/2008 21:46:28 SeasaveAcq is shutting down.

04/06/2008 22:07:50 SeasaveAcq is starting up.
04/06/2008 22:07:51 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/06/2008 22:08:01 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/06/2008 22:31:11 COM1 has been reset.
04/06/2008 22:31:11 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/06/2008 22:31:12 CModemPort::Cleanup() - COM2 has been reset.
04/06/2008 22:31:12 CModemPort::Cleanup() - COM2 has been reset.
04/06/2008 22:31:12 SeasaveAcq is shutting down.

04/07/2008 13:30:19 SeasaveAcq is starting up.
04/07/2008 13:30:20 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/07/2008 13:30:30 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/07/2008 13:50:37 COM1 has been reset.
04/07/2008 13:50:37 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/07/2008 13:50:37 CModemPort::Cleanup() - COM2 has been reset.
04/07/2008 13:50:37 CModemPort::Cleanup() - COM2 has been reset.
04/07/2008 13:50:37 SeasaveAcq is shutting down.

04/08/2008 02:43:24 SeasaveAcq is starting up.
04/08/2008 02:43:25 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/08/2008 02:43:34 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/08/2008 03:00:04 COM1 has been reset.
04/08/2008 03:00:04 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/08/2008 03:00:04 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 03:00:04 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 03:00:04 SeasaveAcq is shutting down.

04/08/2008 13:15:22 SeasaveAcq is starting up.
04/08/2008 13:15:23 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/08/2008 13:15:33 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/08/2008 13:35:40 FFFFFFFF Unsupported modem message: FA 06 3A from SBECarousel
04/08/2008 13:47:37 COM1 has been reset.
04/08/2008 13:47:37 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/08/2008 13:47:37 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 13:47:37 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 13:47:37 SeasaveAcq is shutting down.

04/08/2008 14:38:49 SeasaveAcq is starting up.
04/08/2008 14:38:50 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/08/2008 14:39:00 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/08/2008 15:09:48 COM1 has been reset.
04/08/2008 15:09:48 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/08/2008 15:09:48 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 15:09:48 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 15:09:48 SeasaveAcq is shutting down.

04/08/2008 17:26:00 SeasaveAcq is starting up.
04/08/2008 17:26:01 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/08/2008 17:26:10 ComInit failed for modem port COM2 - error code = 1
04/08/2008 17:26:10 CModemPort::Initialize() failed
04/08/2008 17:26:10 Failed to initialize water sampler
04/08/2008 17:26:11 COM1 has been reset.
04/08/2008 17:26:12 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
04/08/2008 17:26:12 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 17:26:12 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 17:26:12 SeasaveAcq is shutting down.

04/08/2008 17:26:23 SeasaveAcq is starting up.
04/08/2008 17:26:24 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/08/2008 17:26:34 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/08/2008 17:28:20 COM1 has been reset.
04/08/2008 17:28:20 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/08/2008 17:28:20 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 17:28:20 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 17:28:20 SeasaveAcq is shutting down.

04/08/2008 17:48:13 SeasaveAcq is starting up.
04/08/2008 17:48:13 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/08/2008 17:48:23 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/08/2008 17:48:48 COM1 has been reset.
04/08/2008 17:48:48 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/08/2008 17:48:48 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 17:48:48 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 17:48:48 SeasaveAcq is shutting down.

04/08/2008 18:00:46 SeasaveAcq is starting up.
04/08/2008 18:00:47 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/08/2008 18:00:57 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/08/2008 18:01:27 COM1 has been reset.
04/08/2008 18:01:27 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/08/2008 18:01:27 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 18:01:27 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 18:01:27 SeasaveAcq is shutting down.

04/08/2008 19:18:16 SeasaveAcq is starting up.
04/08/2008 19:18:17 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/08/2008 19:18:26 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/08/2008 19:18:29 CSBECarousel::InitializeWaterSampler() failed: cur = 47FBB6F5, start = 47FBB6F3
04/08/2008 19:18:29 Failed to initialize water sampler
04/08/2008 19:18:29 COM1 has been reset.
04/08/2008 19:18:30 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/08/2008 19:18:30 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 19:18:30 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 19:18:30 SeasaveAcq is shutting down.

04/08/2008 19:18:45 SeasaveAcq is starting up.
04/08/2008 19:18:45 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/08/2008 19:18:55 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/08/2008 19:19:55 COM1 has been reset.
04/08/2008 19:19:55 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/08/2008 19:19:55 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 19:19:55 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 19:19:55 SeasaveAcq is shutting down.

04/08/2008 19:20:07 SeasaveAcq is starting up.
04/08/2008 19:20:07 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/08/2008 19:20:17 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/08/2008 19:21:28 COM1 has been reset.
04/08/2008 19:21:28 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/08/2008 19:21:28 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 19:21:28 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 19:21:28 SeasaveAcq is shutting down.

04/08/2008 19:21:43 SeasaveAcq is starting up.
04/08/2008 19:21:44 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/08/2008 19:21:54 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/08/2008 19:23:33 Warning: Closing the serial port may have failed.  It may be necessary to restart your computer.
04/08/2008 19:23:33 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 19:23:33 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 19:23:33 SeasaveAcq is shutting down.

04/08/2008 19:23:52 SeasaveAcq is starting up.
04/08/2008 19:23:52 ComInit failed for COM1
04/08/2008 19:23:52 Failed to initialize COM port or GPIB
04/08/2008 19:23:52 COM1 has been reset.
04/08/2008 19:23:54 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
04/08/2008 19:23:54 SeasaveAcq is shutting down.

04/08/2008 19:24:37 SeasaveAcq is starting up.
04/08/2008 19:24:38 ComInit failed for COM1
04/08/2008 19:24:38 Failed to initialize COM port or GPIB
04/08/2008 19:24:38 COM1 has been reset.
04/08/2008 19:24:40 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
04/08/2008 19:24:40 SeasaveAcq is shutting down.

04/08/2008 19:26:01 SeasaveAcq is starting up.
04/08/2008 19:26:02 ComInit failed for COM1
04/08/2008 19:26:02 Failed to initialize COM port or GPIB
04/08/2008 19:26:02 COM1 has been reset.
04/08/2008 19:26:04 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
04/08/2008 19:26:04 SeasaveAcq is shutting down.

04/08/2008 19:27:42 SeasaveAcq is starting up.
04/08/2008 19:27:42 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/08/2008 19:27:52 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/08/2008 19:29:50 COM1 has been reset.
04/08/2008 19:29:50 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/08/2008 19:29:50 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 19:29:50 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 19:29:50 SeasaveAcq is shutting down.

04/08/2008 19:30:02 SeasaveAcq is starting up.
04/08/2008 19:30:03 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/08/2008 19:30:12 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/08/2008 19:31:44 COM1 has been reset.
04/08/2008 19:31:44 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/08/2008 19:31:44 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 19:31:44 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 19:31:44 SeasaveAcq is shutting down.

04/08/2008 20:14:24 SeasaveAcq is starting up.
04/08/2008 20:14:25 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/08/2008 20:14:35 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/08/2008 20:15:12 COM1 has been reset.
04/08/2008 20:15:12 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/08/2008 20:15:12 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 20:15:12 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 20:15:12 SeasaveAcq is shutting down.

04/08/2008 20:20:18 SeasaveAcq is starting up.
04/08/2008 20:20:19 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/08/2008 20:20:29 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/08/2008 20:21:05 COM1 has been reset.
04/08/2008 20:21:05 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/08/2008 20:21:05 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 20:21:05 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 20:21:05 SeasaveAcq is shutting down.

04/08/2008 20:25:46 SeasaveAcq is starting up.
04/08/2008 20:25:47 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/08/2008 20:25:56 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/08/2008 20:27:25 COM1 has been reset.
04/08/2008 20:27:25 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/08/2008 20:27:25 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 20:27:25 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 20:27:25 SeasaveAcq is shutting down.

04/08/2008 22:21:24 SeasaveAcq is starting up.
04/08/2008 22:21:25 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/08/2008 22:21:35 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/08/2008 22:34:54 FFFFFFFF Unsupported modem message: F8 06 33 from SBECarousel
04/08/2008 23:02:45 COM1 has been reset.
04/08/2008 23:02:45 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/08/2008 23:02:45 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 23:02:45 CModemPort::Cleanup() - COM2 has been reset.
04/08/2008 23:02:45 SeasaveAcq is shutting down.

04/09/2008 00:24:03 SeasaveAcq is starting up.
04/09/2008 00:24:25 SeasaveAcq is shutting down.

04/09/2008 00:25:00 SeasaveAcq is starting up.
04/09/2008 00:25:01 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/09/2008 00:25:11 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/09/2008 00:25:57 COM1 has been reset.
04/09/2008 00:25:57 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/09/2008 00:25:58 CModemPort::Cleanup() - COM2 has been reset.
04/09/2008 00:25:58 CModemPort::Cleanup() - COM2 has been reset.
04/09/2008 00:25:58 SeasaveAcq is shutting down.

04/09/2008 09:23:32 SeasaveAcq is starting up.
04/09/2008 09:23:32 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/09/2008 09:23:42 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/09/2008 09:37:48 COM1 has been reset.
04/09/2008 09:37:48 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/09/2008 09:37:48 CModemPort::Cleanup() - COM2 has been reset.
04/09/2008 09:37:48 CModemPort::Cleanup() - COM2 has been reset.
04/09/2008 09:37:48 SeasaveAcq is shutting down.

04/09/2008 11:09:32 SeasaveAcq is starting up.
04/09/2008 11:09:32 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/09/2008 11:09:42 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/09/2008 11:42:30 COM1 has been reset.
04/09/2008 11:42:30 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/09/2008 11:42:30 CModemPort::Cleanup() - COM2 has been reset.
04/09/2008 11:42:30 CModemPort::Cleanup() - COM2 has been reset.
04/09/2008 11:42:30 SeasaveAcq is shutting down.

04/09/2008 13:06:41 SeasaveAcq is starting up.
04/09/2008 13:06:42 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/09/2008 13:06:52 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/09/2008 13:35:25 COM1 has been reset.
04/09/2008 13:35:25 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/09/2008 13:35:25 CModemPort::Cleanup() - COM2 has been reset.
04/09/2008 13:35:25 CModemPort::Cleanup() - COM2 has been reset.
04/09/2008 13:35:25 SeasaveAcq is shutting down.

04/09/2008 15:22:42 SeasaveAcq is starting up.
04/09/2008 15:22:43 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/09/2008 15:22:53 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/09/2008 18:06:00 COM1 has been reset.
04/09/2008 18:06:00 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/09/2008 18:06:00 CModemPort::Cleanup() - COM2 has been reset.
04/09/2008 18:06:00 CModemPort::Cleanup() - COM2 has been reset.
04/09/2008 18:06:00 SeasaveAcq is shutting down.

04/09/2008 18:21:40 SeasaveAcq is starting up.
04/09/2008 18:21:40 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/09/2008 18:21:50 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/09/2008 18:22:29 COM1 has been reset.
04/09/2008 18:22:29 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/09/2008 18:22:29 CModemPort::Cleanup() - COM2 has been reset.
04/09/2008 18:22:29 CModemPort::Cleanup() - COM2 has been reset.
04/09/2008 18:22:29 SeasaveAcq is shutting down.

04/09/2008 19:09:31 SeasaveAcq is starting up.
04/09/2008 19:09:32 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/09/2008 19:09:42 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/09/2008 19:21:42 COM1 has been reset.
04/09/2008 19:21:42 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/09/2008 19:21:43 CModemPort::Cleanup() - COM2 has been reset.
04/09/2008 19:21:43 CModemPort::Cleanup() - COM2 has been reset.
04/09/2008 19:21:43 SeasaveAcq is shutting down.

04/09/2008 20:27:23 SeasaveAcq is starting up.
04/09/2008 20:27:24 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/09/2008 20:27:33 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/09/2008 20:45:02 COM1 has been reset.
04/09/2008 20:45:02 CDataAcquisitionThread::Stop() took approximately    0.2 seconds.
04/09/2008 20:45:02 CModemPort::Cleanup() - COM2 has been reset.
04/09/2008 20:45:02 CModemPort::Cleanup() - COM2 has been reset.
04/09/2008 20:45:02 SeasaveAcq is shutting down.

04/09/2008 22:07:22 SeasaveAcq is starting up.
04/09/2008 22:07:23 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/09/2008 22:07:33 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/09/2008 22:46:50 COM1 has been reset.
04/09/2008 22:46:50 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/09/2008 22:46:50 CModemPort::Cleanup() - COM2 has been reset.
04/09/2008 22:46:50 CModemPort::Cleanup() - COM2 has been reset.
04/09/2008 22:46:50 SeasaveAcq is shutting down.

04/09/2008 23:46:21 SeasaveAcq is starting up.
04/09/2008 23:46:22 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/09/2008 23:46:31 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/09/2008 23:56:14 FFFFFFFF Unsupported modem message: FF 06 35 from SBECarousel
04/10/2008 00:04:18 FFFFFFFF Unsupported modem message: FF 06 39 from SBECarousel
04/10/2008 00:08:34 COM1 has been reset.
04/10/2008 00:08:34 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/10/2008 00:08:34 CModemPort::Cleanup() - COM2 has been reset.
04/10/2008 00:08:34 CModemPort::Cleanup() - COM2 has been reset.
04/10/2008 00:08:34 SeasaveAcq is shutting down.

04/10/2008 09:06:46 SeasaveAcq is starting up.
04/10/2008 09:06:46 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/10/2008 09:06:56 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/10/2008 09:25:28 COM1 has been reset.
04/10/2008 09:25:28 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/10/2008 09:25:28 CModemPort::Cleanup() - COM2 has been reset.
04/10/2008 09:25:28 CModemPort::Cleanup() - COM2 has been reset.
04/10/2008 09:25:28 SeasaveAcq is shutting down.

04/10/2008 17:48:52 SeasaveAcq is starting up.
04/10/2008 17:48:53 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/10/2008 17:49:03 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/10/2008 19:57:26 COM1 has been reset.
04/10/2008 19:57:26 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/10/2008 19:57:27 CModemPort::Cleanup() - COM2 has been reset.
04/10/2008 19:57:27 CModemPort::Cleanup() - COM2 has been reset.
04/10/2008 19:57:27 SeasaveAcq is shutting down.

04/11/2008 01:33:59 SeasaveAcq is starting up.
04/11/2008 01:34:00 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/11/2008 01:34:10 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/11/2008 01:50:01 COM1 has been reset.
04/11/2008 01:50:01 CDataAcquisitionThread::Stop() took approximately    0.2 seconds.
04/11/2008 01:50:01 CModemPort::Cleanup() - COM2 has been reset.
04/11/2008 01:50:01 CModemPort::Cleanup() - COM2 has been reset.
04/11/2008 01:50:01 SeasaveAcq is shutting down.

04/11/2008 02:10:57 SeasaveAcq is starting up.
04/11/2008 02:10:58 CRS232::Initialize(): port = COM1, baud_rate = 19200, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 16000
04/11/2008 02:11:08 CModemPort::InitializePort(): port = COM2, baud_rate = 300, data_bits = 8, stop_bits = 1, parity = 78
04/11/2008 02:39:23 COM1 has been reset.
04/11/2008 02:39:23 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
04/11/2008 02:39:24 CModemPort::Cleanup() - COM2 has been reset.
04/11/2008 02:39:24 CModemPort::Cleanup() - COM2 has been reset.
04/11/2008 02:39:24 SeasaveAcq is shutting down.