147 Thursday remove ctd0444 install ctd0617 make sea cable change cals check cals 148 0030z Friday water in & out turned off unplug transformer from green power strip shippc not writing to shipserv or shipback make shipserv shared directory of CTDData Tim - light & adjustable xformer for SBE remote Deck test ~0210z restart ADU5 pump cast update tel/e-mail doc check cals spare Carousel to 24pl if needed CTD to 24pl if needed SBE remote beeping at top & bottom Easy way to SECURE Wet Lab aft door check SPAR cable make spare SPAR cable make spare CTD sea cable BUY: Manila folders for ship DeWalt drill battery Masking tape find red light for SBE remote 151 ~0056z restart ADU5 151 ~1418z restart ADU5 151 add lead to TC side of CTD frame CTD063 started before ctd at surface. Upcast, downcast, upcast. data processed out. AsciiOut hdr error message prevented data from backing up in batch file. CTD064 started before ctd at surface. Upcast, downcast, upcast. data processed out. AsciiOut hdr error message prevented data from backing up in batch file. 153 ~1910z restart ADU5 ============================================================= 28May2010 C:\DOcuments and Settings\shippc\Local Settings\Apps\Sea-Bird\Seasave.ini saves the way the seasave was when it was last closed unless it is made Read Only. edit permissions to \\Shipback\ctddatabackup & \\Shipback\ctddatabackup\List - can't overwrite previous files permissions to \\Shipserv\ctddata & \\Shipserv\ctddata\List are correct & can overwrite previous files Test water test - waiting for pump to come on at depth. Started acquisition at 15m. Went down to 25.5m, pumps came on then brought CTD back up. Primary Salinity/conductivity was low until ~25m depth - no salt water completely filling primary cond cell until 25m. Therefore pumps did not come on until 25m depth. Calm Seas. Test2 water test - waiting for pump to come on sitting at 15m depth - didn't come on after 2.3min 3385scans. Salinity/conductivities are low - no salt water completely filling either cond cells. Therefore pumps did not come on. Calm Seas. Test3 deck test before changing sensors to those from 476a. Using 476b.con sensors calibrated in 09. All OK - cond sensors detect salt water and pumps come on. Test4 deck test after changing sensors to those from 476a (then create 476c) calibrated in Apr10. All OK - cond sensors detect salt water and pumps come on. !!!Knudsen not showing on web plots!!!