02/19/2007 01:23:43 SeasaveAcq is starting up.
02/19/2007 01:23:44 ComInit failed for COM1
02/19/2007 01:23:44 Failed to initialize COM port
02/19/2007 01:23:44 COM1 has been reset.
02/19/2007 01:23:44 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
02/19/2007 01:23:44 SeasaveAcq is shutting down.

02/19/2007 01:24:05 SeasaveAcq is starting up.
02/19/2007 01:24:05 CRS232::Initialize(): port = COM1, baud_rate = 9600, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 8000
02/19/2007 01:24:09 failed to initialize NMEA
02/19/2007 01:24:09 COM1 has been reset.
02/19/2007 01:24:09 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
02/19/2007 01:24:09 SeasaveAcq is shutting down.

02/19/2007 01:25:06 SeasaveAcq is starting up.
02/19/2007 01:25:07 ComInit failed for COM2
02/19/2007 01:25:07 Failed to initialize COM port
02/19/2007 01:25:07 COM2 has been reset.
02/19/2007 01:25:07 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
02/19/2007 01:25:07 SeasaveAcq is shutting down.

02/19/2007 01:26:14 SeasaveAcq is starting up.
02/19/2007 01:26:15 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
02/20/2007 21:41:04 COM1 has been reset.
02/20/2007 21:41:04 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
02/20/2007 21:41:04 SeasaveAcq is shutting down.

02/20/2007 21:50:12 SeasaveAcq is starting up.
02/20/2007 21:50:13 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
02/28/2007 16:10:33 COM1 has been reset.
02/28/2007 16:10:33 CDataAcquisitionThread::Stop() took approximately    0.3 seconds.
02/28/2007 16:10:33 SeasaveAcq is shutting down.

03/05/2007 21:48:21 SeasaveAcq is starting up.
03/05/2007 21:48:21 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
03/12/2007 17:24:17 COM1 has been reset.
03/12/2007 17:24:17 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
03/12/2007 17:24:17 SeasaveAcq is shutting down.

03/12/2007 17:37:36 SeasaveAcq is starting up.
03/12/2007 17:37:37 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
03/15/2007 17:02:24 COM1 has been reset.
03/15/2007 17:02:24 CDataAcquisitionThread::Stop() took approximately    0.2 seconds.
03/15/2007 17:02:24 SeasaveAcq is shutting down.

03/15/2007 17:05:07 SeasaveAcq is starting up.
03/15/2007 17:05:08 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
03/15/2007 19:24:16 COM1 has been reset.
03/15/2007 19:24:16 CDataAcquisitionThread::Stop() took approximately    0.0 seconds.
03/15/2007 19:24:16 SeasaveAcq is shutting down.

03/21/2007 14:37:58 SeasaveAcq is starting up.
03/21/2007 14:37:59 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
03/28/2007 11:05:09 COM1 has been reset.
03/28/2007 11:05:09 CDataAcquisitionThread::Stop() took approximately    0.2 seconds.
03/28/2007 11:05:09 SeasaveAcq is shutting down.

03/28/2007 11:05:55 SeasaveAcq is starting up.
03/28/2007 11:05:55 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
03/28/2007 11:27:22 COM1 has been reset.
03/28/2007 11:27:22 CDataAcquisitionThread::Stop() took approximately    0.0 seconds.
03/28/2007 11:27:22 SeasaveAcq is shutting down.

04/02/2007 14:25:03 SeasaveAcq is starting up.
04/02/2007 14:25:04 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
04/11/2007 12:38:53 COM1 has been reset.
04/11/2007 12:38:53 CDataAcquisitionThread::Stop() took approximately    0.5 seconds.
04/11/2007 12:38:53 SeasaveAcq is shutting down.

04/11/2007 12:39:58 SeasaveAcq is starting up.
04/11/2007 12:39:59 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
04/12/2007 16:12:28 COM1 has been reset.
04/12/2007 16:12:28 CDataAcquisitionThread::Stop() took approximately    0.2 seconds.
04/12/2007 16:12:28 SeasaveAcq is shutting down.

05/04/2007 16:29:40 SeasaveAcq is starting up.
05/04/2007 16:29:41 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
05/07/2007 14:52:11 COM1 has been reset.
05/07/2007 14:52:11 CDataAcquisitionThread::Stop() took approximately    0.3 seconds.
05/07/2007 14:52:12 SeasaveAcq is shutting down.

05/17/2007 12:58:59 SeasaveAcq is starting up.
05/17/2007 12:59:00 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
05/17/2007 12:59:22 COM1 has been reset.
05/17/2007 12:59:22 CDataAcquisitionThread::Stop() took approximately    0.0 seconds.
05/17/2007 12:59:22 SeasaveAcq is shutting down.

05/17/2007 13:00:38 SeasaveAcq is starting up.
05/17/2007 13:00:38 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
05/25/2007 01:28:16 COM1 has been reset.
05/25/2007 01:28:16 CDataAcquisitionThread::Stop() took approximately    0.4 seconds.
05/25/2007 01:28:17 SeasaveAcq is shutting down.

05/25/2007 01:33:21 SeasaveAcq is starting up.
05/25/2007 01:33:22 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
05/31/2007 20:05:06 COM1 has been reset.
05/31/2007 20:05:06 CDataAcquisitionThread::Stop() took approximately    0.3 seconds.
05/31/2007 20:05:07 SeasaveAcq is shutting down.

05/31/2007 20:07:46 SeasaveAcq is starting up.
05/31/2007 20:07:47 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
05/31/2007 20:35:00 COM1 has been reset.
05/31/2007 20:35:00 CDataAcquisitionThread::Stop() took approximately    0.0 seconds.
05/31/2007 20:35:00 SeasaveAcq is shutting down.

06/12/2007 19:15:46 SeasaveAcq is starting up.
06/12/2007 19:15:46 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/12/2007 19:16:17 COM1 has been reset.
06/12/2007 19:16:17 CDataAcquisitionThread::Stop() took approximately    0.0 seconds.
06/12/2007 19:16:17 SeasaveAcq is shutting down.

06/12/2007 19:17:48 SeasaveAcq is starting up.
06/12/2007 19:17:49 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/12/2007 19:18:11 COM1 has been reset.
06/12/2007 19:18:11 CDataAcquisitionThread::Stop() took approximately    0.0 seconds.
06/12/2007 19:18:11 SeasaveAcq is shutting down.

06/12/2007 19:22:50 SeasaveAcq is starting up.
06/12/2007 19:22:51 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/17/2007 12:30:35 COM1 has been reset.
06/17/2007 12:30:35 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
06/17/2007 12:30:35 SeasaveAcq is shutting down.

06/17/2007 12:35:14 SeasaveAcq is starting up.
06/17/2007 12:35:14 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/17/2007 13:27:49 COM1 has been reset.
06/17/2007 13:27:49 CDataAcquisitionThread::Stop() took approximately    0.0 seconds.
06/17/2007 13:27:50 SeasaveAcq is shutting down.

06/21/2007 14:45:00 SeasaveAcq is starting up.
06/21/2007 14:45:01 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/27/2007 05:39:33 COM1 has been reset.
06/27/2007 05:39:34 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
06/27/2007 05:39:34 SeasaveAcq is shutting down.

06/27/2007 05:40:06 SeasaveAcq is starting up.
06/27/2007 05:40:07 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
07/05/2007 15:07:51 COM1 has been reset.
07/05/2007 15:07:51 CDataAcquisitionThread::Stop() took approximately    0.2 seconds.
07/05/2007 15:07:51 SeasaveAcq is shutting down.

07/05/2007 15:44:38 SeasaveAcq is starting up.
07/05/2007 15:44:38 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
07/05/2007 16:19:26 COM1 has been reset.
07/05/2007 16:19:26 CDataAcquisitionThread::Stop() took approximately    0.0 seconds.
07/05/2007 16:19:26 SeasaveAcq is shutting down.

07/18/2007 19:59:05 SeasaveAcq is starting up.
07/18/2007 19:59:06 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
07/24/2007 22:25:03 COM1 has been reset.
07/24/2007 22:25:03 CDataAcquisitionThread::Stop() took approximately    0.2 seconds.
07/24/2007 22:25:04 SeasaveAcq is shutting down.

07/24/2007 22:27:21 SeasaveAcq is starting up.
07/24/2007 22:27:22 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
07/26/2007 15:04:54 COM1 has been reset.
07/26/2007 15:04:55 CDataAcquisitionThread::Stop() took approximately    0.6 seconds.
07/26/2007 15:04:55 SeasaveAcq is shutting down.

07/26/2007 15:22:01 SeasaveAcq is starting up.
07/26/2007 15:22:02 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
07/26/2007 15:37:07 COM1 has been reset.
07/26/2007 15:37:07 CDataAcquisitionThread::Stop() took approximately    0.0 seconds.
07/26/2007 15:37:07 SeasaveAcq is shutting down.

09/05/2007 17:26:54 SeasaveAcq is starting up.
09/05/2007 17:26:54 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
09/14/2007 12:10:30 COM1 has been reset.
09/14/2007 12:10:30 CDataAcquisitionThread::Stop() took approximately    0.4 seconds.
09/14/2007 12:10:31 SeasaveAcq is shutting down.

09/14/2007 12:11:47 SeasaveAcq is starting up.
09/14/2007 12:11:48 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
09/14/2007 12:27:51 COM1 has been reset.
09/14/2007 12:27:51 CDataAcquisitionThread::Stop() took approximately    0.0 seconds.
09/14/2007 12:27:51 SeasaveAcq is shutting down.

10/01/2007 15:23:21 SeasaveAcq is starting up.

10/01/2007 15:23:47 SeasaveAcq is starting up.
10/01/2007 15:24:07 SeasaveAcq is shutting down.
10/01/2007 15:24:10 SeasaveAcq is shutting down.

10/01/2007 16:09:58 SeasaveAcq is starting up.
10/01/2007 16:09:59 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
10/02/2007 16:10:46 COM1 has been reset.
10/02/2007 16:10:46 CDataAcquisitionThread::Stop() took approximately    0.0 seconds.
10/02/2007 16:10:46 SeasaveAcq is shutting down.

10/02/2007 16:16:12 SeasaveAcq is starting up.
10/02/2007 16:16:12 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
10/09/2007 10:34:01 COM1 has been reset.
10/09/2007 10:34:01 CDataAcquisitionThread::Stop() took approximately    0.0 seconds.
10/09/2007 10:34:01 SeasaveAcq is shutting down.

10/16/2007 17:34:18 SeasaveAcq is starting up.
10/16/2007 17:34:19 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
10/16/2007 17:39:22 COM1 has been reset.
10/16/2007 17:39:22 CDataAcquisitionThread::Stop() took approximately    0.0 seconds.
10/16/2007 17:39:22 SeasaveAcq is shutting down.

10/17/2007 18:29:10 SeasaveAcq is starting up.
10/17/2007 18:29:10 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
10/17/2007 18:30:06 COM1 has been reset.
10/17/2007 18:30:06 CDataAcquisitionThread::Stop() took approximately    0.0 seconds.
10/17/2007 18:30:06 SeasaveAcq is shutting down.

10/23/2007 13:44:48 SeasaveAcq is starting up.
10/23/2007 13:44:49 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
10/23/2007 19:32:02 COM1 has been reset.
10/23/2007 19:32:03 CDataAcquisitionThread::Stop() took approximately    0.0 seconds.
10/23/2007 19:32:03 SeasaveAcq is shutting down.

10/26/2007 14:24:52 SeasaveAcq is starting up.
10/26/2007 14:24:52 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
10/31/2007 11:46:44 COM1 has been reset.
10/31/2007 11:46:44 CDataAcquisitionThread::Stop() took approximately    0.6 seconds.
10/31/2007 11:46:45 SeasaveAcq is shutting down.

02/18/2008 18:04:02 SeasaveAcq is starting up.
02/18/2008 18:04:02 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
02/18/2008 18:04:23 COM1 has been reset.
02/18/2008 18:04:23 CDataAcquisitionThread::Stop() took approximately    0.0 seconds.
02/18/2008 18:04:23 SeasaveAcq is shutting down.

02/18/2008 18:16:56 SeasaveAcq is starting up.

02/18/2008 18:18:01 SeasaveAcq is starting up.

02/18/2008 18:20:45 SeasaveAcq is starting up.

02/18/2008 18:30:44 SeasaveAcq is starting up.
02/18/2008 18:30:45 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
02/18/2008 18:31:21 COM1 has been reset.
02/18/2008 18:31:21 CDataAcquisitionThread::Stop() took approximately    0.0 seconds.
02/18/2008 18:31:22 SeasaveAcq is shutting down.

02/18/2008 18:34:15 SeasaveAcq is starting up.
02/18/2008 18:34:16 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
02/18/2008 18:43:09 COM1 has been reset.
02/18/2008 18:43:10 CDataAcquisitionThread::Stop() took approximately    0.0 seconds.
02/18/2008 18:43:10 SeasaveAcq is shutting down.

02/18/2008 18:44:39 SeasaveAcq is starting up.
02/18/2008 18:44:39 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
03/03/2008 20:51:59 COM1 has been reset.
03/03/2008 20:51:59 CDataAcquisitionThread::Stop() took approximately    0.5 seconds.
03/03/2008 20:52:00 SeasaveAcq is shutting down.

03/03/2008 20:58:11 SeasaveAcq is starting up.
03/03/2008 20:58:11 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
03/03/2008 21:06:37 COM1 has been reset.
03/03/2008 21:06:37 CDataAcquisitionThread::Stop() took approximately    0.0 seconds.
03/03/2008 21:06:37 SeasaveAcq is shutting down.

03/03/2008 21:29:18 SeasaveAcq is starting up.
03/03/2008 21:29:18 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
03/03/2008 21:39:11 COM1 has been reset.
03/03/2008 21:39:11 CDataAcquisitionThread::Stop() took approximately    0.0 seconds.
03/03/2008 21:39:12 SeasaveAcq is shutting down.

03/03/2008 21:40:46 SeasaveAcq is starting up.
03/03/2008 21:40:47 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
03/04/2008 15:56:28 COM1 has been reset.
03/04/2008 15:56:28 CDataAcquisitionThread::Stop() took approximately    0.3 seconds.
03/04/2008 15:56:28 SeasaveAcq is shutting down.

03/04/2008 19:05:41 SeasaveAcq is starting up.
03/04/2008 19:05:42 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000

03/28/2008 18:29:19 SeasaveAcq is starting up.
03/28/2008 18:29:20 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
03/29/2008 12:13:11 COM1 has been reset.
03/29/2008 12:13:11 CDataAcquisitionThread::Stop() took approximately    0.1 seconds.
03/29/2008 12:13:11 SeasaveAcq is shutting down.

03/29/2008 15:16:19 SeasaveAcq is starting up.
03/29/2008 15:16:20 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
03/29/2008 15:16:47 COM1 has been reset.
03/29/2008 15:16:47 CDataAcquisitionThread::Stop() took approximately    2.2 seconds.
03/29/2008 15:16:47 SeasaveAcq is shutting down.

03/29/2008 15:38:11 SeasaveAcq is starting up.
03/29/2008 15:38:11 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
04/09/2008 13:39:16 COM1 has been reset.
04/09/2008 13:39:16 CDataAcquisitionThread::Stop() took approximately    2.8 seconds.
04/09/2008 13:39:16 Socket communication with Seasave has ended. - Error #10053 - WSAECONNABORTED - 
04/09/2008 13:39:17 SeasaveAcq is shutting down.

04/25/2008 18:18:27 SeasaveAcq is starting up.
04/25/2008 18:18:28 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
04/25/2008 18:22:45 COM1 has been reset.
04/25/2008 18:22:45 CDataAcquisitionThread::Stop() took approximately    2.2 seconds.
04/25/2008 18:22:45 SeasaveAcq is shutting down.

04/25/2008 18:26:31 SeasaveAcq is starting up.
04/25/2008 18:26:32 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
04/25/2008 18:48:44 COM1 has been reset.
04/25/2008 18:48:44 CDataAcquisitionThread::Stop() took approximately    2.0 seconds.
04/25/2008 18:48:44 SeasaveAcq is shutting down.

04/25/2008 18:49:17 SeasaveAcq is starting up.
04/25/2008 18:49:17 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
04/25/2008 19:29:47 COM1 has been reset.
04/25/2008 19:29:47 CDataAcquisitionThread::Stop() took approximately    2.5 seconds.
04/25/2008 19:29:48 Socket communication with Seasave has ended. - Error #10053 - WSAECONNABORTED - 
04/25/2008 19:29:48 SeasaveAcq is shutting down.

04/30/2008 16:55:34 SeasaveAcq is starting up.
04/30/2008 16:55:35 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
05/06/2008 12:43:16 COM1 has been reset.
05/06/2008 12:43:17 CDataAcquisitionThread::Stop() took approximately    2.5 seconds.
05/06/2008 12:43:17 SeasaveAcq is shutting down.

05/06/2008 12:46:18 SeasaveAcq is starting up.
05/06/2008 12:46:19 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
05/09/2008 19:28:38 COM1 has been reset.
05/09/2008 19:28:38 CDataAcquisitionThread::Stop() took approximately    2.0 seconds.
05/09/2008 19:28:38 Socket communication with Seasave has ended. - Error #10053 - WSAECONNABORTED - 
05/09/2008 19:28:39 SeasaveAcq is shutting down.

05/10/2008 13:10:54 SeasaveAcq is starting up.
05/10/2008 13:10:55 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
05/21/2008 12:09:15 COM1 has been reset.
05/21/2008 12:09:15 CDataAcquisitionThread::Stop() took approximately    2.7 seconds.
05/21/2008 12:09:15 Socket communication with Seasave has ended. - Error #10053 - WSAECONNABORTED - 
05/21/2008 12:09:15 SeasaveAcq is shutting down.

05/21/2008 12:10:37 SeasaveAcq is starting up.
05/21/2008 12:10:37 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
05/21/2008 12:47:37 COM1 has been reset.
05/21/2008 12:47:37 CDataAcquisitionThread::Stop() took approximately    2.1 seconds.
05/21/2008 12:47:37 SeasaveAcq is shutting down.

05/27/2008 14:19:55 SeasaveAcq is starting up.
05/27/2008 14:19:56 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/01/2008 16:53:58 COM1 has been reset.
06/01/2008 16:53:58 CDataAcquisitionThread::Stop() took approximately    3.0 seconds.
06/01/2008 16:53:59 SeasaveAcq is shutting down.

06/01/2008 17:02:54 SeasaveAcq is starting up.
06/01/2008 17:02:55 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/01/2008 17:10:08 COM1 has been reset.
06/01/2008 17:10:08 CDataAcquisitionThread::Stop() took approximately    2.0 seconds.
06/01/2008 17:10:08 SeasaveAcq is shutting down.

06/04/2008 14:41:24 SeasaveAcq is starting up.
06/04/2008 14:41:25 CRS232::Initialize(): port = COM1, baud_rate = 9600, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/04/2008 14:41:56 GetMenuLine failed - 1.
06/04/2008 14:41:56 failed to initialize NMEA
06/04/2008 14:41:56 COM1 has been reset.
06/04/2008 14:41:56 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
06/04/2008 14:41:56 Socket communication with Seasave has ended. - Error #10053 - WSAECONNABORTED - 
06/04/2008 14:41:56 SeasaveAcq is shutting down.

06/04/2008 14:49:09 SeasaveAcq is starting up.
06/04/2008 14:49:10 CRS232::Initialize(): port = COM1, baud_rate = 9600, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/04/2008 14:49:29 failed to initialize NMEA
06/04/2008 14:49:29 COM1 has been reset.
06/04/2008 14:49:30 CDataAcquisitionThread::Stop() took approximately    0.0 seconds.
06/04/2008 14:49:30 SeasaveAcq is shutting down.

06/04/2008 14:50:02 SeasaveAcq is starting up.
06/04/2008 14:50:02 CRS232::Initialize(): port = COM1, baud_rate = 9600, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/04/2008 14:50:33 GetMenuLine failed - 1.
06/04/2008 14:50:33 failed to initialize NMEA
06/04/2008 14:50:33 COM1 has been reset.
06/04/2008 14:50:33 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
06/04/2008 14:50:33 Socket communication with Seasave has ended. - Error #10053 - WSAECONNABORTED - 
06/04/2008 14:50:33 SeasaveAcq is shutting down.

06/04/2008 14:53:41 SeasaveAcq is starting up.
06/04/2008 14:53:42 CRS232::Initialize(): port = COM1, baud_rate = 9600, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/04/2008 14:54:13 GetMenuLine failed - 1.
06/04/2008 14:54:13 failed to initialize NMEA
06/04/2008 14:54:13 COM1 has been reset.
06/04/2008 14:54:13 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
06/04/2008 14:54:13 Socket communication with Seasave has ended. - Error #10053 - WSAECONNABORTED - 
06/04/2008 14:54:13 SeasaveAcq is shutting down.

06/04/2008 14:59:27 SeasaveAcq is starting up.
06/04/2008 14:59:28 CRS232::Initialize(): port = COM1, baud_rate = 9600, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/04/2008 14:59:59 GetMenuLine failed - 1.
06/04/2008 14:59:59 failed to initialize NMEA
06/04/2008 14:59:59 COM1 has been reset.
06/04/2008 14:59:59 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
06/04/2008 14:59:59 Socket communication with Seasave has ended. - Error #10053 - WSAECONNABORTED - 
06/04/2008 14:59:59 SeasaveAcq is shutting down.

06/04/2008 15:04:24 SeasaveAcq is starting up.
06/04/2008 15:04:24 CRS232::Initialize(): port = COM1, baud_rate = 9600, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/04/2008 15:04:56 GetMenuLine failed - 1.
06/04/2008 15:04:56 failed to initialize NMEA
06/04/2008 15:04:56 COM1 has been reset.
06/04/2008 15:04:56 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
06/04/2008 15:04:56 Socket communication with Seasave has ended. - Error #10053 - WSAECONNABORTED - 
06/04/2008 15:04:56 SeasaveAcq is shutting down.

06/04/2008 15:12:21 SeasaveAcq is starting up.
06/04/2008 15:12:21 CRS232::Initialize(): port = COM1, baud_rate = 9600, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/04/2008 15:12:52 GetMenuLine failed - 1.
06/04/2008 15:12:52 failed to initialize NMEA
06/04/2008 15:12:52 COM1 has been reset.
06/04/2008 15:12:52 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
06/04/2008 15:12:52 Socket communication with Seasave has ended. - Error #10053 - WSAECONNABORTED - 
06/04/2008 15:12:52 SeasaveAcq is shutting down.

06/04/2008 15:17:52 SeasaveAcq is starting up.
06/04/2008 15:17:52 CRS232::Initialize(): port = COM1, baud_rate = 9600, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/04/2008 15:18:23 GetMenuLine failed - 1.
06/04/2008 15:18:23 failed to initialize NMEA
06/04/2008 15:18:23 COM1 has been reset.
06/04/2008 15:18:23 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
06/04/2008 15:18:23 Socket communication with Seasave has ended. - Error #10053 - WSAECONNABORTED - 
06/04/2008 15:18:23 SeasaveAcq is shutting down.

06/04/2008 15:19:15 SeasaveAcq is starting up.
06/04/2008 15:19:15 CRS232::Initialize(): port = COM1, baud_rate = 9600, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/04/2008 15:19:47 GetMenuLine failed - 1.
06/04/2008 15:19:47 failed to initialize NMEA
06/04/2008 15:19:47 COM1 has been reset.
06/04/2008 15:19:47 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
06/04/2008 15:19:47 Socket communication with Seasave has ended. - Error #10053 - WSAECONNABORTED - 
06/04/2008 15:19:47 SeasaveAcq is shutting down.

06/04/2008 15:22:02 SeasaveAcq is starting up.
06/04/2008 15:22:03 CRS232::Initialize(): port = COM1, baud_rate = 9600, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/04/2008 15:22:27 failed to initialize NMEA
06/04/2008 15:22:27 COM1 has been reset.
06/04/2008 15:22:27 CDataAcquisitionThread::Stop() took approximately    0.0 seconds.
06/04/2008 15:22:27 SeasaveAcq is shutting down.

06/04/2008 15:26:04 SeasaveAcq is starting up.
06/04/2008 15:26:05 CRS232::Initialize(): port = COM1, baud_rate = 9600, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/04/2008 15:26:25 failed to initialize NMEA
06/04/2008 15:26:26 COM1 has been reset.
06/04/2008 15:26:26 CDataAcquisitionThread::Stop() took approximately    0.0 seconds.
06/04/2008 15:26:26 SeasaveAcq is shutting down.

06/04/2008 15:28:59 SeasaveAcq is starting up.
06/04/2008 15:28:59 CRS232::Initialize(): port = COM1, baud_rate = 9600, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/04/2008 15:29:30 GetMenuLine failed - 1.
06/04/2008 15:29:30 failed to initialize NMEA
06/04/2008 15:29:30 COM1 has been reset.
06/04/2008 15:29:30 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
06/04/2008 15:29:30 Socket communication with Seasave has ended. - Error #10053 - WSAECONNABORTED - 
06/04/2008 15:29:30 SeasaveAcq is shutting down.

06/04/2008 15:32:19 SeasaveAcq is starting up.
06/04/2008 15:32:19 CRS232::Initialize(): port = COM1, baud_rate = 9600, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/04/2008 15:32:50 GetMenuLine failed - 1.
06/04/2008 15:32:50 failed to initialize NMEA
06/04/2008 15:32:50 COM1 has been reset.
06/04/2008 15:32:50 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
06/04/2008 15:32:50 Socket communication with Seasave has ended. - Error #10053 - WSAECONNABORTED - 
06/04/2008 15:32:50 SeasaveAcq is shutting down.

06/04/2008 15:33:59 SeasaveAcq is starting up.
06/04/2008 15:34:00 CRS232::Initialize(): port = COM1, baud_rate = 9600, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/04/2008 15:34:31 GetMenuLine failed - 1.
06/04/2008 15:34:31 failed to initialize NMEA
06/04/2008 15:34:31 COM1 has been reset.
06/04/2008 15:34:31 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
06/04/2008 15:34:31 Socket communication with Seasave has ended. - Error #10053 - WSAECONNABORTED - 
06/04/2008 15:34:31 SeasaveAcq is shutting down.

06/04/2008 16:06:44 SeasaveAcq is starting up.
06/04/2008 16:06:45 CRS232::Initialize(): port = COM1, baud_rate = 9600, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/04/2008 16:07:12 failed to initialize NMEA
06/04/2008 16:07:12 COM1 has been reset.
06/04/2008 16:07:12 CDataAcquisitionThread::Stop() took approximately    0.0 seconds.
06/04/2008 16:07:12 SeasaveAcq is shutting down.

06/04/2008 16:08:03 SeasaveAcq is starting up.
06/04/2008 16:08:03 CRS232::Initialize(): port = COM1, baud_rate = 9600, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/04/2008 16:08:34 GetMenuLine failed - 1.
06/04/2008 16:08:34 failed to initialize NMEA
06/04/2008 16:08:34 COM1 has been reset.
06/04/2008 16:08:34 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
06/04/2008 16:08:34 Socket communication with Seasave has ended. - Error #10053 - WSAECONNABORTED - 
06/04/2008 16:08:34 SeasaveAcq is shutting down.

06/04/2008 16:11:30 SeasaveAcq is starting up.
06/04/2008 16:11:31 CRS232::Initialize(): port = COM1, baud_rate = 9600, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/04/2008 16:12:02 GetMenuLine failed - 1.
06/04/2008 16:12:02 failed to initialize NMEA
06/04/2008 16:12:02 COM1 has been reset.
06/04/2008 16:12:02 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
06/04/2008 16:12:02 Socket communication with Seasave has ended. - Error #10053 - WSAECONNABORTED - 
06/04/2008 16:12:02 SeasaveAcq is shutting down.

06/04/2008 16:17:02 SeasaveAcq is starting up.
06/04/2008 16:17:03 CRS232::Initialize(): port = COM1, baud_rate = 9600, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/04/2008 16:17:34 GetMenuLine failed - 1.
06/04/2008 16:17:34 failed to initialize NMEA
06/04/2008 16:17:34 COM1 has been reset.
06/04/2008 16:17:34 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
06/04/2008 16:17:34 Socket communication with Seasave has ended. - Error #10053 - WSAECONNABORTED - 
06/04/2008 16:17:34 SeasaveAcq is shutting down.

06/04/2008 16:24:54 SeasaveAcq is starting up.
06/04/2008 16:24:55 CRS232::Initialize(): port = COM1, baud_rate = 9600, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/04/2008 16:25:26 GetMenuLine failed - 1.
06/04/2008 16:25:26 failed to initialize NMEA
06/04/2008 16:25:26 COM1 has been reset.
06/04/2008 16:25:27 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
06/04/2008 16:25:27 Socket communication with Seasave has ended. - Error #10053 - WSAECONNABORTED - 
06/04/2008 16:25:27 SeasaveAcq is shutting down.

06/04/2008 16:30:08 SeasaveAcq is starting up.
06/04/2008 16:30:09 CRS232::Initialize(): port = COM1, baud_rate = 9600, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/04/2008 16:30:40 GetMenuLine failed - 1.
06/04/2008 16:30:40 failed to initialize NMEA
06/04/2008 16:30:40 COM1 has been reset.
06/04/2008 16:30:40 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
06/04/2008 16:30:40 Socket communication with Seasave has ended. - Error #10053 - WSAECONNABORTED - 
06/04/2008 16:30:40 SeasaveAcq is shutting down.

06/04/2008 16:58:28 SeasaveAcq is starting up.
06/04/2008 16:58:29 CRS232::Initialize(): port = COM1, baud_rate = 9600, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/04/2008 16:59:00 GetMenuLine failed - 1.
06/04/2008 16:59:00 failed to initialize NMEA
06/04/2008 16:59:00 COM1 has been reset.
06/04/2008 16:59:00 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
06/04/2008 16:59:00 Socket communication with Seasave has ended. - Error #10053 - WSAECONNABORTED - 
06/04/2008 16:59:00 SeasaveAcq is shutting down.

06/04/2008 17:00:55 SeasaveAcq is starting up.
06/04/2008 17:00:56 CRS232::Initialize(): port = COM1, baud_rate = 9600, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/04/2008 17:01:21 failed to initialize NMEA
06/04/2008 17:01:21 COM1 has been reset.
06/04/2008 17:01:22 CDataAcquisitionThread::Stop() took approximately    0.0 seconds.
06/04/2008 17:01:22 SeasaveAcq is shutting down.

06/04/2008 17:02:55 SeasaveAcq is starting up.
06/04/2008 17:02:56 CRS232::Initialize(): port = COM1, baud_rate = 9600, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/04/2008 17:03:27 GetMenuLine failed - 1.
06/04/2008 17:03:27 failed to initialize NMEA
06/04/2008 17:03:27 COM1 has been reset.
06/04/2008 17:03:27 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
06/04/2008 17:03:27 Socket communication with Seasave has ended. - Error #10053 - WSAECONNABORTED - 
06/04/2008 17:03:27 SeasaveAcq is shutting down.

06/04/2008 17:07:20 SeasaveAcq is starting up.
06/04/2008 17:07:21 CRS232::Initialize(): port = COM1, baud_rate = 9600, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/04/2008 17:07:27 failed to initialize NMEA
06/04/2008 17:07:27 COM1 has been reset.
06/04/2008 17:07:27 CDataAcquisitionThread::Stop() took approximately    0.0 seconds.
06/04/2008 17:07:27 SeasaveAcq is shutting down.

06/04/2008 17:08:57 SeasaveAcq is starting up.
06/04/2008 17:08:57 CRS232::Initialize(): port = COM1, baud_rate = 9600, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/04/2008 17:09:18 COM1 has been reset.
06/04/2008 17:09:18 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
06/04/2008 17:09:18 Socket communication with Seasave has ended. - Error #10053 - WSAECONNABORTED - 
06/04/2008 17:09:18 SeasaveAcq is shutting down.

06/04/2008 17:09:57 SeasaveAcq is starting up.
06/04/2008 17:09:58 CRS232::Initialize(): port = COM1, baud_rate = 9600, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/04/2008 17:10:05 failed to initialize NMEA
06/04/2008 17:10:05 COM1 has been reset.
06/04/2008 17:10:05 CDataAcquisitionThread::Stop() took approximately    0.0 seconds.
06/04/2008 17:10:05 SeasaveAcq is shutting down.

06/04/2008 17:10:32 SeasaveAcq is starting up.
06/04/2008 17:10:32 CRS232::Initialize(): port = COM1, baud_rate = 9600, data_bits = 8, stop_bits = 1, parity = 78, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/04/2008 17:10:53 COM1 has been reset.
06/04/2008 17:10:53 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
06/04/2008 17:10:53 Socket communication with Seasave has ended. - Error #10053 - WSAECONNABORTED - 
06/04/2008 17:10:53 SeasaveAcq is shutting down.

06/04/2008 17:11:40 SeasaveAcq is starting up.
06/04/2008 17:11:41 CRS232::Initialize(): port = COM1, baud_rate = 9600, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/04/2008 17:12:02 COM1 has been reset.
06/04/2008 17:12:02 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
06/04/2008 17:12:02 Socket communication with Seasave has ended. - Error #10053 - WSAECONNABORTED - 
06/04/2008 17:12:02 SeasaveAcq is shutting down.

06/04/2008 17:13:20 SeasaveAcq is starting up.
06/04/2008 17:13:21 CRS232::Initialize(): port = COM1, baud_rate = 9600, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/04/2008 17:13:42 COM1 has been reset.
06/04/2008 17:13:42 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
06/04/2008 17:13:42 Socket communication with Seasave has ended. - Error #10053 - WSAECONNABORTED - 
06/04/2008 17:13:42 SeasaveAcq is shutting down.

06/04/2008 17:15:01 SeasaveAcq is starting up.
06/04/2008 17:15:02 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/04/2008 17:15:38 COM1 has been reset.
06/04/2008 17:15:38 CDataAcquisitionThread::Stop() took less than 0.1 seconds.
06/04/2008 17:15:39 Socket communication with Seasave has ended. - Error #10053 - WSAECONNABORTED - 
06/04/2008 17:15:39 SeasaveAcq is shutting down.

06/04/2008 17:20:22 SeasaveAcq is starting up.
06/04/2008 17:20:23 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/06/2008 18:05:30 COM1 has been reset.
06/06/2008 18:05:30 CDataAcquisitionThread::Stop() took approximately    2.8 seconds.
06/06/2008 18:05:30 Socket communication with Seasave has ended. - Error #10053 - WSAECONNABORTED - 
06/06/2008 18:05:30 SeasaveAcq is shutting down.

06/06/2008 18:07:19 SeasaveAcq is starting up.
06/06/2008 18:07:20 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/21/2008 11:16:32 COM1 has been reset.
06/21/2008 11:16:32 CDataAcquisitionThread::Stop() took approximately    2.6 seconds.
06/21/2008 11:16:32 Socket communication with Seasave has ended. - Error #10053 - WSAECONNABORTED - 
06/21/2008 11:16:33 SeasaveAcq is shutting down.

06/21/2008 11:17:29 SeasaveAcq is starting up.
06/21/2008 11:17:30 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000
06/21/2008 12:14:16 COM1 has been reset.
06/21/2008 12:14:16 CDataAcquisitionThread::Stop() took approximately    2.6 seconds.
06/21/2008 12:14:16 SeasaveAcq is shutting down.

06/27/2008 13:57:40 SeasaveAcq is starting up.
06/27/2008 13:57:40 CRS232::Initialize(): port = COM1, baud_rate = 4800, data_bits = 7, stop_bits = 1, parity = 69, m_XON_Limit = 1024, m_XOFF_Limit = 8000