Instrument Make:  RMR - Remote Measurements & Research Company 
Model: RAD - Radiometer Analog to Digital Interface with Eppley PSP (Precision Spectral Pyra-
nometer)  and  PIR  (Precision  Infrared  Radiometer)
S/N: RAD_222 
Calibration Date: 2018-02-03

Installation:  Installed on the top of the MET mast 08 March 2018

RAW datafile: MET 2016/03/14 22:22:50.683 RAD $WIR22,16/03/14,22:22:50, 175, -227.7, 323.05, 16.21, 15.06, 322.53, 20.2, 10.6

dsLog time stamp:
MET 2016/03/14 22:22:50.683  RAD 

MET                 Meteorological Sensor
2016/03/14          date in gmt
22:22:50.683        time in gmt
RAD                 data collected from the radiometers
data		    $WIR22,16/03/14,22:22:50, 175, -227.7, 323.05, 16.21, 15.06, 322.53, 20.2, 10.6


Example Value	Heading		Description						Unit	
$WIR22		ID 		NMEA-style tag.                                		-
16/03/14	DATE  		yy/MM/dd					 	GMT
22:22:50	TIME 		hh:mm:ss						GMT
175		# 		the number of samples that went into the averages.	-
-227.7		PIR 		the average voltage from the PIR thermopile.		millivolts
323.05		LW		the computed longwave downwelling irradiance		W m-2.
16.21		TCASE 		the PIR case temperature				°C.
15.06		TDOME 		the PIR dome temperature				°C.
322.53		SW		the computed shortwave downwelling irradiance.		W m-2.
20.2		T-AVR 		the temperature on the circuit board.			°C.
10.6		BATT 		the battery voltage after the input diode drop		volts

## NOTES
WIR22 BOARD (REV B) VERSION: 1.17c, VERSION DATE: 2009,03,24
Digital Interface Board - Rev C. Feb 2009
Current datetime: 180321,122658
 -----USER ENTER INFORMATION-----------------------------
'k' -->Set PSP coefficient (7.98E-6 v/(W/m^2))
'K' -->Set PIR coefficient (2.64E-6 v/(W/m^2))
'A' -->Change Identifier String. (22)
 -----RAD CALIBRATION DATA---------------------------------
'g' -->Set PSP amplifier gain value. (118.8)
'o' -->Set PSP amplifier offset, mv. (0.1 mv)
'G' -->Set PIR amplifier gain value. (825.2)
'O' -->Set PIR amplifier offset, mv. (1.7 mv)
'C' -->Set Case 33274.0 ohms, -6.622e-5, 9.528e-2, -3.398e1
'D' -->Set Dome 33122.0 ohms, -4.220e-5, 7.334e-2, -2.929e1
'V' -->Set Thermistor Reference & ADC Reference Voltage (4.1 mV).
 Cmax = 2048 (fixed)
 ---------DATE & TIME SETTING------------------------------
'T' -->Set the date/time.
 -----TIMING SETTING---------------------------------------
'L' -->Set averaging time in seconds. (10)
 -----OTHER------------------------------------------------
'S' -->Sample 12 bit A to D.
'r' --> toggle test mode.
'X' -->Exit this menu, return to operation.
=========================================================
Command?>