Instrument Make and Model: Biospherical Instruments QSR2150A
S/N: 50212
Calibration Date: 04 November 2015
Installation: Met Mast, March 09, 2018  

RAW datafile: MET 2016/03/06 13:00:07.544 PAR $ME, 1943.201, 16.06, 12.928

dslog time stamp:
MET 2016/03/06 13:00:07.544 PAR

MET		Meteorological Sensor
2016/03/06	Date in GMT
13:00:07.544	Time in GMT
PAR		Data collected from the PAR sensor


Sensor data:
$ME, 1943.201, 16.06, 12.928

Example value		Description			Units
$ME			NMEA Tag			
1943.201		calibrated sensor reading	microEinsteins/m2
16.06			circuit board temp		Degrees C
12.928			supply voltage			DC voltage


### Notes
$ME, 2210.822, 20.21, 13.098

Biospherical Instruments Inc: Digital Log Engine v: 2.07

Model: QSR2150A 50211
A to set number of samples averaged before update: 160
B to set the baudrate, now: 9600
C to set the Calibration Factor for digital output: 0.000614
D to set the description available for display in software: QSR50211
I to send unit ID and serial number (password protected)
J to set the immersion factor (not automatically applied): 1.000000
K to set dark zero, currently dark = 0.009391v. 
M to set the operating mode (0=streaming, 1=polled with tag= A) currently 0
O to configure the OUTPUTs, temperature is enabled, line voltage is enabled
P to set a preamble for the data transmission = $ME, 
Q to set startup mode (1 = no diagnostic messages, or 0 for diagnostics): 1
R to set ADC sample rate: 16
S to send ADC diagnostic information
T will give the latest temperature reading 
U sets the calibration units: uE/m2/sec
W to set the how calibration constants are used
Calibration Mode = B
Output will be calibrated for use in air dividing net volts by 0.000614 with 
  units of uE/m2/sec
X to restart sampling
Sensor temperature: 20.21 C
Input Supply Voltage measures 13.119v